86512-C5000 Front Bumper Lower for KIA Sorento ’15 / Sorento ’21
- KIA front bumper lower listed for KIA Sorento ’15 / Sorento ’21
- Searchable OE reference: 86512-C5000
- Configuration checks: upper edge alignment below the lamps, overall corner curvature and bracket and bolt-hole spacing
- Vehicle opening check: lamp or grille openings and side-retainer engagement
- Record the mounting position shown by the removed front bumper lower
- Use the vehicle component as the final physical comparison sample
- Ask for current carton data with availability
- Commercial request: identify volume and delivery location
- Fitment review benefits from adjacent-panel image plus straight-on view
86512-CC000 Front Bumper Lower for KIA Sonet 2022 / Carnival ’02-’04
- Front Bumper Lower supply entry for the KIA model label KIA Sonet 2022 / Carnival ’02-’04
- OE reference shown: 86512-CC000
- Fitment identifiers: overall corner curvature, bracket and bolt-hole spacing and lamp or grille openings
- Interface review: side-retainer engagement and upper edge alignment below the lamps
- Identify whether one side or a matched pair is required
- Use front and rear images of the old component to confirm the pictured version
- Request pieces per carton with the B2B offer
- Wholesale quotation requires quantity plus destination
- Buyer verification photos: connector close-up and chassis-plate image
86512-D3000 Front Bumper Lower for Hyundai Tucson ’16 / Tucson ’18
- Front Bumper Lower application: Hyundai Tucson ’16 / Tucson ’18
- Quotation input: quantity plus destination
- Retain the removed front bumper lower for workshop comparison
- Written reference: 86512-D3000
- Packing specification: request with quotation
- Assess overall corner curvature
- Workshop route: a body-shop buyer should record overall corner curvature before the shipment is booked
86512-D3520 Front Bumper Lower for Hyundai Tucson ’18 / Tucson ’21
- Quotation input: quantity plus destination
- Inspect side-retainer engagement against the removed part
- Packing specification: request with quotation
- Review the vehicle record before purchasing
- Retain the removed front bumper lower for workshop comparison
- Photograph overall corner curvature
- Workshop route: the procurement contact should document overall corner curvature before the quotation is approved
86512-D9000 Front Bumper Lower for KIA Kx5 / Sportage ’21
- KIA application shown on this page: KIA Kx5 / Sportage ’21
- Identification number: 86512-D9000
- Physical comparison: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Vehicle fitment check: bracket and bolt-hole spacing and lamp or grille openings
- Identify whether one side or a matched pair is required
- Review the complete product image beside the part taken from the vehicle
- Check packaging against the intended order volume
- Stock enquiry: include requested quantity and destination
- Document the component with straight-on view and side-profile photograph
86512-J9000 Front Bumper Lower for Hyundai Kona / Kona 2021
- Retain the removed front bumper lower for workshop comparison
- Record lamp or grille openings
- Record overall corner curvature against the removed part
- Front Bumper Lower application: Hyundai Kona / Kona 2021
- Quotation input: quantity plus destination
- Compare side-retainer engagement
- Workshop route: a vehicle inspector should evaluate lamp or grille openings before the commercial request is submitted
86512-J9NA0 Front Bumper Lower for Hyundai Kona N 2021 / Matiz-I ’99
- Written reference: 86512-J9NA0
- Verify bracket and bolt-hole spacing
- Confirm lamp or grille openings
- Retain the removed front bumper lower for workshop comparison
- Trace side-retainer engagement at the installation area
- Review the vehicle record before purchasing
- Workshop route: the service adviser should confirm bracket and bolt-hole spacing before the fitment decision is signed off
86512-K0000 Front Bumper for KIA Soul’15 / Soul’20
- Inspect seal boundary before preparing a quotation for 86512-K0000
- Confirm lens profile, then verify the 86512-K0000 outer edge
- KIA application: Soul'15 / Soul'20
- Component under review: Front Bumper
- Photograph 86512-K0000 from front and reverse directions
- Record seal boundary when checking the KIA Soul'15 / Soul'20 86512-K0000 option
- Use 86512-K0000 only after connector and mounts agree
- State quantity and destination for the KIA Soul'15 / Soul'20 B2B enquiry
- Treat 86512-K0000 as a cross-reference, not the only fitment test
86512-L1100 Front Bumper Lower for Hyundai Sonata ’21 / Santa Fe ’00-’06
- Retain the removed front bumper lower for workshop comparison
- Match side-retainer engagement
- Quotation input: quantity plus destination
- Cross-check overall corner curvature at the installation area
- Packing specification: request with quotation
- Written reference: 86512-L1100
- Workshop route: the importing distributor should evaluate side-retainer engagement before the delivery plan is confirmed
86512-N9000 Front Bumper Lower for Hyundai Tucson ’21 / Ix35 ’10-’12
- Document the vehicle record before purchasing
- Measure upper edge alignment below the lamps
- Photograph lamp or grille openings against the removed part
- Packing specification: request with quotation
- Compare overall corner curvature
- Measure bracket and bolt-hole spacing at the installation area
- Workshop route: the repair planner should measure upper edge alignment below the lamps before the fitment decision is signed off
86512-N9010 Front Bumper Lower for Hyundai Tucson ’21 / Ix35 ’10-’12
- Written reference: 86512-N9010
- Examine overall corner curvature
- Assess the vehicle record before purchasing
- Confirm side-retainer engagement against the removed part
- Evaluate bracket and bolt-hole spacing
- Retain the removed front bumper lower for workshop comparison
- Workshop route: the importing distributor should record overall corner curvature before the delivery plan is confirmed
86512-P1000 Front Bumper Lower for KIA Sportage ’21
- Vehicle designation for this front bumper lower: KIA Sportage ’21
- OE lookup term: 86512-P1000
- Component identifiers: lamp or grille openings, side-retainer engagement and upper edge alignment below the lamps
- Vehicle-side check: overall corner curvature and bracket and bolt-hole spacing
- Check mounting direction without relying on a mirrored image
- Review the complete product image beside the part taken from the vehicle
- Carton information is supplied with live availability
- Trade pricing request: state order size and shipping market
- Fitment evidence: provide underside image and straight-on view
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.