(1030,1032,1061)Dial for ISUZU Npr,nhr ’93/100P / Npr,nhr ’93/JAC
- Retain an ISUZU Npr,nhr '93/100P / Npr,nhr '93/JAC application record showing this (1030,1032,1061)dial, fixing bosses and the surrounding mounting area
- Place the original and replacement side by side to review fixing bosses
- Attach images of the vehicle opening, complete part and mounting details
- The source OE field is blank; keep product metadata empty
- Photograph the arrival condition of body aperture for the receiving record
- Include order volume, destination and required left or right side where applicable
- Vehicle record for this listing: ISUZU Npr,nhr '93/100P / Npr,nhr '93/JAC
- Packing information is not supplied in the source row
- Measure clip direction where a visual check is not conclusive
04711-SAG-OOOZZ Front Bumper for HONDA FIT/JAZZ’03 / FIT/JAZZ’09
- Review connection points together with the outside contour
- Keep the OE string 04711-SAG-OOOZZ exactly as supplied
- Use consistent camera angles when comparing the pictured item with the removed part
- Provide the application, quantity and ship-to country in the B2B enquiry
- Inspect connection points under clear workshop lighting
- Catalog application shown for the item: HONDA FIT/JAZZ'03 / FIT/JAZZ'09
- Retain labels and packaging while any question about part curvature is resolved
- Current export packing must be confirmed with the quotation
- Retain a HONDA FIT/JAZZ'03 / FIT/JAZZ'09 enquiry set showing this front bumper, part curvature and the nearby mounting area
04711-TF0-0ZZ Front Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- Confirm left or right orientation at the actual vehicle opening
- Source vehicle designation: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this front bumper, lens profile and the vehicle opening
- Verify the delivered side and configuration before checking left or right orientation
- Quote 04711-TF0-0ZZ exactly as written in the source
- Packing starts from the source note 187*24*47CM
- Compare lens profile with the removed part before fitment decision
- Attach comparison photos of the vehicle opening, complete catalogued part and mounting details
- Quote the full vehicle designation and required units in the purchase request
04711-TF0-0ZZ Front Bumper for HONDA FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- The application evidence names HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- Use adjacent-panel gap to separate similar-looking versions
- Keep the OE string 04711-TF0-0ZZ exactly as supplied
- Place the original and replacement side by side to review attachment points
- Compare the delivered item with approved images and review guide slots
- Use the approved comparison evidence when requesting price and lead time
- Attach fitment images of the vehicle opening, complete replacement piece and mounting details
- Use the source packing line 187*24*47CM only as a quotation reference
- Retain a HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 enquiry set showing this front bumper, attachment points and the nearby mounting area
04711-TF0-G00 Front Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- Source vehicle designation: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- Use a close view of connector interface for technical confirmation
- Recheck the source carton entry 154*30*50CM before shipment
- List the intended vehicle, catalogued part position, purchase volume and destination
- Check the front and reverse views for differences in connector interface
- Use consistent camera angles when comparing the pictured item with the removed part
- Carry 04711-TF0-G00 unchanged into the quotation
- Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this front bumper, connector interface and the vehicle opening
- Record transport damage that could affect surrounding clearance
04711-TF0-G00 Front Bumper for HONDA FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- The listed packing reference is 154*30*50CM
- Use the approved comparison evidence when requesting price and lead time
- Keep the OE string 04711-TF0-G00 exactly as supplied
- Do not begin installation if locating holes differs from the approved sample
- Photograph bracket profile and the complete reverse face
- Source vehicle designation: HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- Check locating holes without bending brackets or clips
- Retain a HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 enquiry set showing this front bumper, bracket profile and the nearby mounting area
- Attach fitment images of the vehicle opening, complete replacement piece and mounting details
04711-TF0-G00ZZ Rear Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- Quote 04711-TF0-G00ZZ exactly as written in the source
- Review seal boundary together with the outside contour
- The FIAT product worksheet leaves the packing field blank
- Check the front and reverse views for differences in lens profile
- Catalog application shown for the item: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this rear bumper, lens profile and the vehicle opening
- List the intended vehicle, catalogued part position, purchase volume and destination
- Photograph the required side and the surrounding panel gap during a loose trial fit
- Hold a mismatched item from workshop use and document seal boundary
04711-TF0-G00ZZ Rear Bumper for HONDA FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- Use a close view of attachment points for technical confirmation
- Retain a HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 enquiry set showing this rear bumper, attachment points and the nearby mounting area
- Check guide slots without bending brackets or clips
- Keep the OE string 04711-TF0-G00ZZ exactly as supplied
- At receipt, inspect attachment points before removing all protective packaging
- Send clear pictures of the original part before it is removed from the vehicle
- This source row identifies HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- No packing reference is available in the HONDA source workbook
- State the required quantity, installation position and receiving country
04715-SAG-OOOZZ Rear Bumper for HONDA FIT/JAZZ’03 / FIT/JAZZ’09
- The HONDA source workbook records 04715-SAG-OOOZZ for this part
- Match the image to the HONDA FIT/JAZZ'03 / FIT/JAZZ'09 vehicle record
- Photograph overall dimensions and the complete reverse face
- Confirm carton size and quantity per carton before freight calculation
- Retain labels and packaging while any question about overall dimensions is resolved
- Retain a HONDA FIT/JAZZ'03 / FIT/JAZZ'09 enquiry set showing this rear bumper, overall dimensions and the nearby mounting area
- Check corner geometry without bending brackets or clips
- Include a full-part image plus close views of brackets, connectors and guides
- Send the model designation, requested units and delivery market for availability checking
04715-TF0-G00 Rear Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- Record transport damage that could affect market-specific details
- Attach comparison photos of the vehicle opening, complete catalogued part and mounting details
- Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this rear bumper, visible outline and the vehicle opening
- Check rear construction without bending brackets or clips
- Compare visible outline with the removed part before fitment decision
- The listed packing reference is 118*15*57CM
- The authoritative OE entry is 04715-TF0-G00
- Use FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 as the recorded application
- State the required quantity, installation position and receiving country
04715-TF0-G00 Rear Bumper for HONDA FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02
- Vehicle record for this listing: HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
- Retain a HONDA FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 enquiry set showing this rear bumper, fixing bosses and the nearby mounting area
- Review clip direction together with the outside contour
- Photograph the arrival condition of body aperture for the receiving record
- OE evidence in this row: 04715-TF0-G00
- Keep a vehicle identification image with the replacement piece comparison fitment images
- Packing starts from the source note 118*15*57CM
- Place the original and replacement side by side to review fixing bosses
- Ask for stock and commercial terms only after the pictured version is confirmed
0501801L/ 806068948R Door Handle for RENAULT Duster 08-12
- Use front, reverse-side and fixing-point photos for confirmation
- Item: Door Handle
- Review the complete part shape rather than relying on the model name alone
- Verify the intended front, rear, left or right installed position where applicable
- Recorded application: RENAULT Duster 08-12
- Match connector interface with the removed item
- Confirm surrounding clearance before finalizing approving this door handle.
- State order purchase quantity and arrival country for a B2B quotation
- For fitment approval, capture the retaining edge with the removed sample
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.