86512-S1000 Front Bumper Lower for Hyundai Santa Fe ’19
- Packing specification: request with quotation
- Note overall corner curvature
- Written reference: 86512-S1000
- Front Bumper Lower application: Hyundai Santa Fe ’19
- Retain the removed front bumper lower for workshop comparison
- Measure lamp or grille openings at the installation area
- Workshop route: a workshop estimator should evaluate overall corner curvature before the quotation is approved
86512-S1500 Front Bumper Lower for Hyundai Santa Fe ’21 / Excel’92-’95
- Front Bumper Lower application: Hyundai Santa Fe ’21 / Excel’92-’95
- Written reference: 86512-S1500
- Trace side-retainer engagement at the installation area
- Measure upper edge alignment below the lamps against the removed part
- Confirm the vehicle record before purchasing
- Retain the removed front bumper lower for workshop comparison
- Workshop route: the maintenance supervisor should align bracket and bolt-hole spacing before the carton is allocated
86513-0X000 / 86514-0X000 / 86613-0X000 / 86614-0X000 Front Bumper Bracket / Rear Bumper Bracket for Hyundai I10 ’07 / I10 ’11
- Measure side-retainer engagement at the installation area
- Trace upper edge alignment below the lamps against the removed part
- Cross-check bracket and bolt-hole spacing
- Quotation input: quantity plus destination
- Packing specification: request with quotation
- Inspect lamp or grille openings
- Workshop route: a vehicle inspector should capture bracket and bolt-hole spacing before the carton is allocated
86513-0X100 / 86514-0X100 Front Bumper Bracket for Hyundai I10 ’11 / I10 ‘2014
- Written references: 86513-0X100 / 86514-0X100
- Trace the vehicle record before purchasing
- Front Bumper Bracket application: Hyundai I10 ’11 / I10 ‘2014
- Retain the removed front bumper bracket for workshop comparison
- Check overall corner curvature
- Quotation input: quantity plus destination
- Workshop route: the importing distributor should confirm overall corner curvature before the carton is allocated
86513-1D000 / 86514-1D000 Packed Headlight Assembly for KIA Carens’10
- KIA application shown on this page: KIA Carens’10
- Identification numbers: 86513-1D000 / 86514-1D000
- Physical comparison: upper edge alignment below the lamps, overall corner curvature and bracket and bolt-hole spacing
- Interface review: lamp or grille openings and side-retainer engagement
- Verify required orientation against the original part
- Compare the removed front bumper holder with the product image before ordering
- Carton information is supplied with live availability
- Quotation details: required quantity and destination
- Identification photos should contain full component outline and original-label photograph
86513-1E000 / 86514-1E000 Front Bumper Bracket for Hyundai Accent ’06
- Packing entry: 58 × 38 × 28CM / 50PCS
- Note bracket and bolt-hole spacing at the installation area
- Quotation input: quantity plus destination
- Front Bumper Bracket application: Hyundai Accent ’06
- Examine overall corner curvature
- Inspect lamp or grille openings against the removed part
- Written references: 86513-1E000 / 86514-1E000
86513-1F000 / 86514-1F000 Front Bumper Bracket for KIA Sportage ’05 / Sportage ’08
- KIA application shown on this page: KIA Sportage ’05 / Sportage ’08
- Identification numbers: 86513-1F000 / 86514-1F000
- Fitment identifiers: lamp or grille openings, side-retainer engagement and upper edge alignment below the lamps
- Position verification: overall corner curvature and bracket and bolt-hole spacing
- State the exact vehicle side or component location for this front bumper bracket
- Confirm visible shape and reverse-side mounting details together
- Packing information: confirm with the current quotation
- Availability enquiry: provide units needed and delivery point
- Provide one full component outline and one original-label photograph
86513-1M000 / 86514-1M000 Front Bumper Holder for KIA Forte
- Front Bumper Holder supply entry for the KIA model label KIA Forte
- OE reference shown: 86513-1M000 / 86514-1M000
- Selection criteria: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Mounting check: bracket and bolt-hole spacing and lamp or grille openings
- Use a vehicle-side photo to establish the required direction
- Compare the removed front bumper holder with the product image before ordering
- Carton information is supplied with live availability
- Quotation details: required quantity and destination
- For remote review, send upper-edge image and connector close-up
86513-1R000 / 86514-1R000 Front Bumper Bracket for Hyundai Accent ’11
- Quotation input: quantity plus destination
- Retain the removed front bumper bracket for workshop comparison
- Written references: 86513-1R000 / 86514-1R000
- Note bracket and bolt-hole spacing at the installation area
- Front Bumper Bracket application: Hyundai Accent ’11
- Trace the vehicle record before purchasing
- Capture upper edge alignment below the lamps
86513-1W000 / 86514-1W000 Front Bumper Bracket for KIA Rio ’11 Sedan / Rio’16 Sedan
- KIA application shown on this page: KIA Rio ’11 Sedan / Rio’16 Sedan
- Identification numbers: 86513-1W000 / 86514-1W000
- Part recognition points: overall corner curvature, bracket and bolt-hole spacing and lamp or grille openings
- Mounting-area evidence: side-retainer engagement and upper edge alignment below the lamps
- Specify the installation side in the KIA Rio ’11 Sedan / Rio’16 Sedan quotation request
- Keep the original front bumper bracket available for a side-by-side review
- Check packaging against the intended order volume
- Price and lead-time check: specify pieces and destination
- Workshop images should cover original-label photograph and corner-profile view
86513-1W200 / 86514-1W200 Front Bumper Bracket for KIA Rio’16 Sedan / Rio’11 Hatchback
- Verify the front bumper bracket electrical connector with the vehicle identification data
- State quantity and destination for the KIA Rio'16 Sedan / Rio'11 Hatchback B2B enquiry
- Compare electrical connector while reviewing the 86513-1W200 configuration
- Use KIA Rio'16 Sedan / Rio'11 Hatchback production details to review 86513-1W200
- Treat 86513-1W200 as a cross-reference, not the only fitment test
- Match 86513-1W200 to the removed sample at every fixing point
- Use 86513-1W200 only after connector and mounts agree
- Use housing depth to distinguish the KIA Rio'16 Sedan / Rio'11 Hatchback front bumper bracket version
- Review the KIA Rio'16 Sedan / Rio'11 Hatchback opening before approving 86513-1W200
86513-1Y000 / 86514-1Y000 Front Bumper Bracket Small for KIA Picanto ’11
- KIA front bumper bracket small listed for KIA Picanto ’11
- Searchable OE references: 86513-1Y000 / 86514-1Y000
- Key matching points: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Installation-area review: bracket and bolt-hole spacing and lamp or grille openings
- Specify the installation side in the KIA Picanto ’11 quotation request
- Retain the original item until the replacement version is accepted
- Ask for packing dimensions when freight is quoted
- Stock enquiry: include requested quantity and destination
- Reference images should include corner-profile view plus adjacent-panel image
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.