86511-C1000 Front Bumper for Hyundai Sonata ’14
- Written reference: 86511-C1000
- Verify the vehicle record before purchasing
- Note lamp or grille openings against the removed part
- Retain the removed front bumper for workshop comparison
- Packing entry: 210 × 18 × 55CM / 3PCS
- Quotation input: quantity plus destination
- Workshop route: the maintenance supervisor should record upper edge alignment below the lamps before the quotation is approved
86511-C4010 Front Bumper for Hyundai New Atos Eon / Atos ’21
- Written reference: 86511-C4010
- Review bracket and bolt-hole spacing against the removed part
- Packing specification: request with quotation
- Review overall corner curvature at the installation area
- Assess relationship to absorber and reinforcement
86511-C5000 / 86571-C5000 Front Bumper for KIA Sorento ’15 / Sorento ’21
- Front Bumper matched to the KIA designation KIA Sorento ’15 / Sorento ’21
- OE cross-reference: 86511-C5000 / 86571-C5000
- Part recognition points: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
- Vehicle fitment check: upper edge alignment below the lamps and overall corner curvature
- Specify the installation side in the KIA Sorento ’15 / Sorento ’21 quotation request
- Keep the original front bumper available for a side-by-side review
- Confirm export packaging for the destination market
- Export offer input: purchase volume and destination country
- Vehicle-side proof should show upper-edge image and rear mounting view
86511-C7000 Front Bumper for Hyundai I20 ’12 / I20 ’16
- Evaluate lamp or grille openings against the removed part
- Packing specification: request with quotation
- Quotation input: quantity plus destination
- Note the vehicle record before purchasing
- Written reference: 86511-C7000
- Cross-check upper edge alignment below the lamps
- Workshop route: a collision-repair specialist should mark upper edge alignment below the lamps before the vehicle is dismantled
86511-CC000 Front Bumper Upper for KIA Sonet 2022 / Carnival ’02-’04
- Front Bumper Upper matched to the KIA designation KIA Sonet 2022 / Carnival ’02-’04
- OE cross-reference: 86511-CC000
- Primary fitment checks: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
- Mounting check: upper edge alignment below the lamps and overall corner curvature
- Confirm the required left, right, front or rear installation position
- Match the complete outline and attachment face before approving fitment
- Ask for packing dimensions when freight is quoted
- Wholesale quotation requires quantity plus destination
- Attach straight-on view and side-profile photograph to the product enquiry
86511-CP000 Front Bumper for KIA Bongo’19 / Sumsung / Banggo ’98
- Vehicle designation for this front bumper: KIA Bongo’19 / Sumsung / Banggo ’98
- OE lookup term: 86511-CP000
- Physical comparison: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Position check: bracket and bolt-hole spacing and lamp or grille openings
- Check front/rear and left/right location where applicable
- Keep the original front bumper available for a side-by-side review
- Ask for current carton data with availability
- Supply request: include required pieces and receiving location
- A clear lower-retainer view should accompany the corner-profile view
86511-D3000 Front Bumper for Hyundai Tucson ’16 / Tucson ’18
- Written reference: 86511-D3000
- Quotation input: quantity plus destination
- Packing specification: request with quotation
- Retain the removed front bumper for workshop comparison
- Front Bumper application: Hyundai Tucson ’16 / Tucson ’18
- Document bracket and bolt-hole spacing
- Workshop route: the stock controller should record bracket and bolt-hole spacing before the carton is allocated
86511-D3500 Front Bumper for Hyundai Tucson ’18 / Tucson ’21
- Note side-retainer engagement against the removed part
- Review the vehicle record before purchasing
- Retain the removed front bumper for workshop comparison
- Quotation input: quantity plus destination
- Packing specification: request with quotation
- Front Bumper application: Hyundai Tucson ’18 / Tucson ’21
- Workshop route: a collision-repair specialist should review overall corner curvature before the quotation is approved
86511-D4010 Front Bumper for KIA K5 ’16 / K5 ’19
- Confirm outer contour, then verify the 86511-D4010 outer edge
- Treat 86511-D4010 as a cross-reference, not the only fitment test
- Compare the original KIA K5 '16 / K5 '19 part with 86511-D4010
- Check 86511-D4010 orientation before side selection
- Provide installed, reverse-side and front bumper fixing-point photographs
- KIA application: K5 '16 / K5 '19
- Measure KIA K5 '16 / K5 '19 surface finish for version selection
- Confirm 86511-D4010 clearances beside surrounding components
- Component under review: Front Bumper
86511-D4200 Front Bumper for KIA K5 ’16 / K5 ’19
- Ask the workshop to compare 86511-D4200 without modifying brackets
- Use housing depth to distinguish the KIA K5 '16 / K5 '19 front bumper version
- Review KIA K5 '16 / K5 '19 terminal layout for side confirmation
- Resolve any housing depth difference affecting the 86511-D4200 version
- Use a vehicle-side image to confirm 86511-D4200 and housing depth
- Match 86511-D4200 to the removed sample at every fixing point
- Begin 86511-D4200 selection with a direct mounting-interface comparison
- Do not finalize KIA K5 '16 / K5 '19 front bumper fitment until electrical connector and housing depth agree
- Compare electrical connector while reviewing the 86511-D4200 configuration
86511-D4510 Front Bumper for KIA K5 ’19 / K5 ’21
- Treat 86511-D4510 as a cross-reference, not the only fitment test
- Include 86511-D4510 in the technical approval request
- Confirm the KIA K5 '19 / K5 '21 front bumper front, rear, left or right position where applicable
- Request current front bumper carton dimensions and pieces per carton
- Use left/right orientation to distinguish the KIA K5 '19 / K5 '21 front bumper version
- Ask the workshop to compare 86511-D4510 without modifying brackets
- Inspect KIA K5 '19 / K5 '21 seal boundary for version selection
- Check whether 86511-D4510 matches the photographed KIA K5 '19 / K5 '21 construction
- Validate the front bumper outline associated with 86511-D4510
86511-D7500 / 86512-D7500 Front Bumper for Hyundai Tucson ’18 / Tucson ’21
- Capture the vehicle record before purchasing
- Evaluate upper edge alignment below the lamps at the installation area
- Written references: 86511-D7500 / 86512-D7500
- Packing specification: request with quotation
- Compare side-retainer engagement
- Confirm overall corner curvature against the removed part
- Workshop route: the procurement contact should capture lamp or grille openings before the fitment decision is signed off
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.