86511-C7000 Front Bumper for Hyundai I20 ’12 / I20 ’16

Front Bumper for Hyundai I20 ’12 / I20 ’16: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This front bumper is associated with Hyundai I20 ’12 / I20 ’16. Cross-check 86511-C7000 against the removed item, paying attention to every prefix, suffix and character. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

A collision-repair specialist should mark upper edge alignment below the lamps, review overall corner curvature, and align side-retainer engagement before the vehicle is dismantled. This route applies to the front bumper shown for Hyundai I20 ’12 / I20 ’16.

If images accompany the enquiry, include a chassis-plate image, a fastener detail, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with chassis-plate image to mark upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fastener detail. Before the vehicle is dismantled, review side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai I20 ’12 / I20 ’16 vehicle record.

The service adviser should record upper edge alignment below the lamps from an installation-opening picture, then inspect side-retainer engagement before the repair schedule is finalized. The installation team should note overall corner curvature from a vehicle-side photograph, then assess overall corner curvature before the vehicle is dismantled. The installation team should assess upper edge alignment below the lamps from a removed-part overview, then photograph overall corner curvature before the installation begins. A vehicle inspector should evaluate overall corner curvature from an original-label photograph, then confirm bracket and bolt-hole spacing before the stock request is released.

Ordering Information

Place old and replacement components side by side, then review every fixing point before installation. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

How should the model application be interpreted?

The associated model designation is Hyundai I20 ’12 / I20 ’16. Confirm the body or electrical configuration relevant to this front bumper.

How can an incorrect order be avoided?

Use the old component to check upper edge alignment below the lamps and bracket and bolt-hole spacing. Also state the installation side or position in the enquiry.

What should be included in a B2B enquiry?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Include clear original-part photographs when the exact configuration needs further review.