Fog Light for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16
- Verify electrical plug and pin layout
- Fog Light application: Hyundai Ix35 ’10-’12 / Ix35 ’13-’16
- Note the vehicle record before purchasing
- Packing specification: request with quotation
- Trace mounting tabs around the housing
- Inspect clearance beside bumper and grille against the removed part
- Workshop route: the procurement contact should record electrical plug and pin layout before the carton is allocated
Fog Light for ISUZU D-max Tfr ’06 / D-max Tfr ’12 / D-max Tfr ’18
- Send clear pictures of the original part prior to it is removed from the vehicle
- List the intended vehicle, part position, purchase volume and destination
- Use left or right orientation to separate similar-looking versions
- At receipt, inspect lens profile prior to removing all protective packaging
- The supplied model field reads ISUZU D-max Tfr '06 / D-max Tfr '12 / D-max Tfr '18
- Retain an ISUZU D-max Tfr '06 / D-max Tfr '12 / D-max Tfr '18 application record showing this fog light, lens profile and the surrounding mounting area
- Measure seal boundary where a visual check is not conclusive
- Use the source packing line 60*26*48CM/40PCS only as a quotation reference
- The empty OE cell must remain empty until a verified source is provided
Fog Light for ISUZU D-max Tfr ’06 / D-max Tfr ’12 / D-max Tfr ’18 – Version B
- The source OE field is blank; keep product metadata empty
- Add a ruler reference when mounting-point spacing cannot be judged from a photograph
- Place the original and replacement side by side to review lens profile
- List the intended vehicle, part position, purchase volume and destination
- The pictured part is filed under ISUZU D-max Tfr '06 / D-max Tfr '12 / D-max Tfr '18
- Photograph lens profile and the complete reverse face
- Compare the delivered item with approved images and review seal boundary
- Ask the supplier to calculate export packing for the requested volume
- Retain an ISUZU D-max Tfr '06 / D-max Tfr '12 / D-max Tfr '18 application record showing this fog light, lens profile and the surrounding mounting area
Fog Light for ISUZU D-max Tfr ’18 / D-max Tfr ’21
- Review lower supports together with the outside contour
- The supplied model field reads ISUZU D-max Tfr '18 / D-max Tfr '21
- Request packing data for the required purchase quantity
- Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this fog light, upper mounts and the surrounding mounting area
- The source OE field is blank; keep product metadata empty
- Confirm front or rear position at the actual vehicle opening
- Capture the installed location prior to workshop disassembly begins
- Request availability with the application, quantity and comparison images
- Use the goods-in check to confirm lower supports and visible edge condition
Fog Light for ISUZU D-max Tfr ’18 / D-max Tfr ’21 – Version B
- Packing information is not supplied in the source row
- The supplied model field reads ISUZU D-max Tfr '18 / D-max Tfr '21
- Photograph the arrival condition of vehicle opening for the receiving record
- Photograph the required side and the surrounding panel gap during a loose trial fit
- Document vehicle opening prior to releasing the purchase order
- Compare outer shape with the removed part prior to verification
- The ISUZU source sheet provides no OE value for this part
- Add destination details after fitment and side selection are complete
- Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this fog light, outer shape and the surrounding mounting area
Fog Light for ISUZU Npr,nhr ’04-05 600P / Npr,nhr 700P / FB415 FM515
- Attach images of the vehicle opening, complete part and mounting details
- Keep the original part until adjacent-panel gap is verified
- Retain an ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 application record showing this fog light, attachment points and the surrounding mounting area
- Revalidate 76*47*36CM/20PCS after the final quantity is known
- Compare attachment points with the removed part prior to verification
- Send the model designation, requested units and delivery market for availability checking
- Use the generic OE message rather than guessing a number
- Record transport damage that could affect adjacent-panel gap
- Begin identification with the ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 designation
Fog Light for ISUZU Tfr ‘2000-2002 / Tfr ‘2007 / Tfr ’99-’03
- Record transport damage that could affect front or rear position
- Ask the supplier to calculate export packing for the requested volume
- The ISUZU source sheet associates this item with ISUZU Tfr '2000-2002 / Tfr '2007 / Tfr '99-'03
- The empty OE cell must remain empty until a verified source is provided
- Photograph upper mounts and the complete reverse face
- Attach images of the vehicle opening, complete part and mounting details
- List the intended vehicle, part position, purchase volume and destination
- Retain an ISUZU Tfr '2000-2002 / Tfr '2007 / Tfr '99-'03 application record showing this fog light, upper mounts and the surrounding mounting area
- Document front or rear position prior to releasing the purchase order
Fog Light for KIA Bongo ’03 / Bongo ’04
- Fog Light catalogue application: KIA Bongo ’03 / Bongo ’04
- This entry carries no OE reference; confirm the visible version before purchase
- Required inspection items: electrical plug and pin layout, mounting tabs around the housing and left or right installation position
- Position verification: clearance beside bumper and grille and lens profile and outer edge
- Use a vehicle-side photo to establish the required direction
- Keep the original fog light available for a side-by-side review
- Carton record: 59 × 25 × 46CM / 40PCS
- B2B enquiry: send order volume and delivery country
- Buyer verification photos: fixing-point close-up and installation-opening picture
Fog Light for KIA Bongo’19 / Sumsung / Banggo ’98
- KIA application shown on this page: KIA Bongo’19 / Sumsung / Banggo ’98
- OE field is blank, so selection must follow the image and mounting layout
- Version checkpoints: electrical plug and pin layout, mounting tabs around the housing and left or right installation position
- Position check: clearance beside bumper and grille and lens profile and outer edge
- Verify orientation at the KIA Bongo’19 / Sumsung / Banggo ’98 installation area before purchase
- Retain the original item until the replacement version is accepted
- Packing notation: 70 × 33 × 30CM / 40PCS
- Commercial request: identify volume and delivery location
- Fitment evidence: provide removed-part overview and lower-retainer view
Fog Light for KIA Cerato ’07 / Forte
- KIA fog light listed for KIA Cerato ’07 / Forte
- OE reference not listed; the photographed profile is the primary identifier
- Key matching points: electrical plug and pin layout, mounting tabs around the housing and left or right installation position
- Mounting check: clearance beside bumper and grille and lens profile and outer edge
- Specify the installation side in the KIA Cerato ’07 / Forte quotation request
- Compare physical geometry rather than selecting from the model name alone
- Packing data: 79 × 56 × 41CM / 20PCS
- Stock enquiry: include requested quantity and destination
- Buyer verification photos: rear mounting view and removed-part overview
Fog Light for KIA K2 / K2 ’14 / K2 ’16
- Do a loose trial placement before releasing the Fog Light order
- Photograph Fog Light from front and reverse directions
- Review the KIA K2 / K2 '14 / K2 '16 opening before approving Fog Light
- Validate the fog light outline associated with Fog Light
- Use left/right orientation to distinguish the KIA K2 / K2 '14 / K2 '16 fog light version
- Compare the original KIA K2 / K2 '14 / K2 '16 part with Fog Light
- Record seal boundary when checking the KIA K2 / K2 '14 / K2 '16 Fog Light option
- State quantity and destination for the KIA K2 / K2 '14 / K2 '16 B2B enquiry
- Check Fog Light orientation before side selection
Fog Light for KIA K5 ’16 / K5 ’19
- Do not finalize KIA K5 '16 / K5 '19 fog light fitment until retaining clips and edge alignment agree
- Confirm retaining clips, then verify the Fog Light outer edge
- Begin Fog Light selection with a direct mounting-interface comparison
- Inspect the fog light reverse face before accepting Fog Light
- Compare retaining clips while reviewing the Fog Light configuration
- Confirm the KIA K5 '16 / K5 '19 fog light front, rear, left or right position where applicable
- Request current fog light carton dimensions and pieces per carton
- Supply clear fixing-point evidence for the Fog Light enquiry
- Use Fog Light only after connector and mounts agree
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.