Fog Light for ISUZU D-max Tfr ’18 / D-max Tfr ’21
- Review lower supports together with the outside contour
- The supplied model field reads ISUZU D-max Tfr '18 / D-max Tfr '21
- Request packing data for the required purchase quantity
- Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this fog light, upper mounts and the surrounding mounting area
- The source OE field is blank; keep product metadata empty
- Confirm front or rear position at the actual vehicle opening
- Capture the installed location prior to workshop disassembly begins
- Request availability with the application, quantity and comparison images
- Use the goods-in check to confirm lower supports and visible edge condition
Shown here is a fog light recorded for ISUZU D-max Tfr '18 / D-max Tfr '21. Check the image, mounting interface and vehicle evidence prior to purchase.
Source Item Summary
The ISUZU source sheet names Fog Light as the part and ISUZU D-max Tfr '18 / D-max Tfr '21 as its application. Both fields should remain together during review.
Shipment Preparation
Packing is not specified in the ISUZU source sheet. Ask for an updated export-packing calculation with the quotation.
Selection Checklist
- Measure the surrounding gap after loose placement.
- Compare upper mounts with the removed ISUZU D-max Tfr '18 / D-max Tfr '21 part.
- Use fixing-point close-ups to support selection.
- Compare the outside contour under matching camera angles.
- Retain the vehicle identification photograph with the order.
- Check guides and clips for shipping damage.
ISUZU Application Evidence
Link images of upper mounts and lower supports to the ISUZU D-max Tfr '18 / D-max Tfr '21 chassis or vehicle record for this fog light. Purchasing should wait until front or rear position agrees with the removed part.
Receiving Check
Prior to shelving the item, verify the required side and inspect lower supports. Keep protective material in place until acceptance.
Workshop Fit Check
Use the vehicle opening and removed part as references. Resolve every difference in front or rear position prior to permanent installation.
Decision Process
First confirm ISUZU D-max Tfr '18 / D-max Tfr '21, then compare the original fog light and finally review shipment terms. A conflict at any earlier stage should pause the next one.
Part Version Review
Use close-up images for upper mounts and lower supports. A wider vehicle-side view should show front or rear position and surrounding clearance.
Version Evidence
Keep the supporting material with the enquiry: an edge-profile photograph showing nearby panel clearance; a close view that clearly shows upper mounts; an arrival photograph prior to protective packing is removed; a dry-fit view made without bending or drilling the part; the full ISUZU D-max Tfr '18 / D-max Tfr '21 designation from the vehicle record.
Commercial Enquiry
Include the intended side, vehicle market and purchase quantity in the B2B enquiry. Confirm carton size and quantity per carton prior to freight calculation.
OE Data Rule
The ISUZU source sheet leaves the OE field empty. Store an empty metadata value and show Available on Request. Do not derive a number from a title, filename, model year or neighboring row.
Vehicle Confirmation
Treat ISUZU D-max Tfr '18 / D-max Tfr '21 as the source application, then confirm production and market details from the actual vehicle.
Technical Questions
Can the title supply a missing OE number?
No. A title, filename, model year or neighboring row is not authoritative OE evidence.
How should a trial fit be performed?
Use light locator engagement only; never force the fog light into a conflicting opening.
How should the source OE field be used?
Keep OE metadata empty and display Available on Request because the source OE cell is blank.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
