Bumper Grille for KIA Cerato ’05 / Cerato ’07
- KIA bumper grille listed for KIA Cerato ’05 / Cerato ’07
- OE reference not listed; the photographed profile is the primary identifier
- Component identifiers: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Attachment review: bracket and bolt-hole spacing and lamp or grille openings
- State the exact vehicle side or component location for this bumper grille
- Review the complete product image beside the part taken from the vehicle
- Export packing: 83 × 13 × 8CM / 3PCS
- Quotation details: required quantity and destination
- A clear vehicle-side photograph should accompany the side-profile photograph
Bumper Grille for KIA Soul’09-’11 / Soul’12-’13 / Soul’15
- Review the KIA Soul'09-'11 / Soul'12-'13 / Soul'15 opening before approving Bumper Grille
- Check Bumper Grille orientation before side selection
- Request current bumper grille carton dimensions and pieces per carton
- Begin Bumper Grille selection with a direct mounting-interface comparison
- Resolve any installed position difference affecting the Bumper Grille version
- Compare mounting tabs while reviewing the Bumper Grille configuration
- KIA application: Soul'09-'11 / Soul'12-'13 / Soul'15
- KIA Soul'09-'11 / Soul'12-'13 / Soul'15 Bumper Grille OEM number is not confirmed; use physical comparison
- Use Bumper Grille only after connector and mounts agree
Bumper Grille Lower for KIA Soul’15 / Soul’20
- Inspect the bumper grille lower reverse face before accepting Bumper Grille Lower
- KIA Soul'15 / Soul'20 Bumper Grille Lower OEM number is not confirmed; use physical comparison
- Measure the bumper grille lower electrical connector during a dry fit
- Confirm electrical connector, then verify the Bumper Grille Lower outer edge
- Include Bumper Grille Lower in the technical approval request
- Use KIA Soul'15 / Soul'20 production details to review Bumper Grille Lower
- Provide installed, reverse-side and bumper grille lower fixing-point photographs
- Confirm the KIA Soul'15 / Soul'20 bumper grille lower front, rear, left or right position where applicable
- Validate the bumper grille lower outline associated with Bumper Grille Lower
Bumper Grille Upper for KIA Soul’09-’11 / Soul’12-’13 / Soul’15
- Check Bumper Grille Upper orientation before side selection
- Do a loose trial placement before releasing the Bumper Grille Upper order
- Begin Bumper Grille Upper selection with a direct mounting-interface comparison
- Inspect the bumper grille upper reverse face before accepting Bumper Grille Upper
- Use KIA Soul'09-'11 / Soul'12-'13 / Soul'15 production details to review Bumper Grille Upper
- Supply clear fixing-point evidence for the Bumper Grille Upper enquiry
- Record fastener spacing when checking the KIA Soul'09-'11 / Soul'12-'13 / Soul'15 Bumper Grille Upper option
- Measure the bumper grille upper mounting tabs at the vehicle opening
- Component under review: Bumper Grille Upper
Bumper Lamp for Daewoo Cruze ’15 / Cruze ’17
- Match clearance beside bumper and grille
- Bumper Lamp application: Daewoo Cruze ’15 / Cruze ’17
- Retain the removed bumper lamp for workshop comparison
- Document the vehicle record before purchasing
- Trace the photographed shape because the OEM field is blank
- Quotation input: quantity plus destination
- Workshop route: the receiving technician should document left or right installation position before the repair schedule is finalized
Bumper Lamp for Daewoo Damas-I / Damas-Ii / Cruze ’09
- Measure the vehicle record before purchasing
- Trace clearance beside bumper and grille
- Quotation input: quantity plus destination
- Inspect electrical plug and pin layout against the removed part
- Packing entry: 54 × 28 × 50CM / 20PCS
- Bumper Lamp application: Daewoo Damas-I / Damas-Ii / Cruze ’09
- Workshop route: the parts coordinator should evaluate left or right installation position before the packing plan is prepared
Bumper Lamp for Daewoo Tico / Damas-I
- Retain the removed bumper lamp for workshop comparison
- Confirm the photographed shape because the OEM field is blank
- Bumper Lamp application: Daewoo Tico / Damas-I
- Quotation input: quantity plus destination
- Check mounting tabs around the housing
- Packing specification: request with quotation
- Workshop route: a vehicle inspector should measure mounting tabs around the housing before the fitment decision is signed off
Bumper Lamp for Hyundai Kona N 2021 / Matiz-I ’99
- Examine mounting tabs around the housing against the removed part
- Bumper Lamp application: Hyundai Kona N 2021 / Matiz-I ’99
- Cross-check lens profile and outer edge
- Retain the removed bumper lamp for workshop comparison
- Note clearance beside bumper and grille
- Document the vehicle record before purchasing
- Workshop route: the receiving technician should mark clearance beside bumper and grille before the purchase order is issued
Bumper Lamp for KIA Optima ’09 / Sephia’96-’98
- KIA bumper lamp listed for KIA Optima ’09 / Sephia’96-’98
- OE reference not listed; the photographed profile is the primary identifier
- Visual match points: electrical plug and pin layout, mounting tabs around the housing and left or right installation position
- Mounting-area evidence: clearance beside bumper and grille and lens profile and outer edge
- Use a vehicle-side photo to establish the required direction
- Photograph the removed item before dismantling adjacent hardware
- Packing reference: 61 × 36 × 46CM / 50PCS
- Price and lead-time check: specify pieces and destination
- Comparison photographs: capture upper-edge image plus rear mounting view
Bumper Light Cover for KIA Ceed ’15 / K2
- Validate the bumper light cover outline associated with Bumper Light Cover
- Use Bumper Light Cover only after connector and mounts agree
- Check whether Bumper Light Cover matches the photographed KIA Ceed '15 / K2 construction
- Keep Bumper Light Cover with the vehicle identification photograph
- Supply clear fixing-point evidence for the Bumper Light Cover enquiry
- Component under review: Bumper Light Cover
- State quantity and destination for the KIA Ceed '15 / K2 B2B enquiry
- Compare the original KIA Ceed '15 / K2 part with Bumper Light Cover
- KIA Ceed '15 / K2 Bumper Light Cover OEM number is not confirmed; use physical comparison
Bumper Light for NISSAN Logan ’04
- Confirm Bumper Light clearances beside surrounding components
- Use NISSAN Logan '04 production details to review Bumper Light
- Inspect terminal layout before preparing a quotation for Bumper Light
- Record terminal layout when checking the NISSAN Logan '04 Bumper Light option
- Use housing depth to distinguish the NISSAN Logan '04 bumper light version
- Check whether Bumper Light matches the photographed NISSAN Logan '04 construction
- Compare electrical connector while reviewing the Bumper Light configuration
- Do a loose trial placement before releasing the Bumper Light order
- Use Bumper Light only after connector and mounts agree
Bumper Light for RENAULT Logan ’04
- Verify the specified front, rear, left or right position where applicable
- Use a automobile-side photo to verify panel alignment.
- Examine locating holes before finalizing procurement
- Use front, reverse-side and fixing-point pictures for confirmation
- Keep the vehicle unit production information with the enquiry
- Request current carton dimensions and pieces per carton with the quotation.
- The catalogue does not send an OE number, so identification must rely on the pictured construction and the old application piece.
- State order quantity and destination for a B2B quotation
- For receiving inspection, capture the inner face with an edge profile image
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.