Bumper Lamp for Daewoo Damas-I / Damas-Ii / Cruze ’09

Bumper Lamp for Daewoo Damas-I / Damas-Ii / Cruze ’09: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Ordering Information

This bumper lamp is associated with Daewoo Damas-I / Damas-Ii / Cruze ’09. Keep OEM blank on purchase documents unless a number can be read directly from the removed part. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The parts coordinator should evaluate left or right installation position, cross-check clearance beside bumper and grille, and document mounting tabs around the housing before the packing plan is prepared. This route applies to the bumper lamp shown for Daewoo Damas-I / Damas-Ii / Cruze ’09.

If images accompany the enquiry, include an underside image, a vehicle-side photograph, and a straight-on view. Label the evidence with the vehicle designation Daewoo Damas-I / Damas-Ii / Cruze ’09 so the workshop and purchasing team review one configuration.

The parts coordinator can begin with underside image to evaluate left or right installation position. A second image should show lens profile and outer edge from vehicle-side photograph. Before the packing plan is prepared, cross-check mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Damas-I / Damas-Ii / Cruze ’09 vehicle record.

The stock controller should confirm left or right installation position from an adjacent-panel image, then review electrical plug and pin layout before the commercial request is submitted. The stock controller should mark left or right installation position from a connector close-up, then mark left or right installation position before the packing plan is prepared. The service adviser should note mounting tabs around the housing from a side-profile photograph, then confirm left or right installation position before the fitment decision is signed off. The stock controller should record left or right installation position from a rear mounting view, then trace electrical plug and pin layout before the replacement is test-positioned.

Component Matching Record

Arrange a dry comparison before final fastening, and stop if holes or clips need force to line up. Recorded packing is 54 × 28 × 50CM / 20PCS; reconfirm current packing when freight is quoted.

Part Recognition Guide

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which Hyundai model does this page cover?

Application information points to Daewoo Damas-I / Damas-Ii / Cruze ’09. A workshop should still compare the removed item and mounting location before ordering.

What should be compared with the removed component?

Ask the workshop to inspect left or right installation position together with lens profile and outer edge. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.