Showing 3025–3036 of 5389 results

92405-3W000 / 92406-3W000 Read Fog Light for KIA Sportage ’11

  • KIA read fog light listed for KIA Sportage ’11
  • Searchable OE references: 92405-3W000 / 92406-3W000
  • Version checkpoints: mounting tabs around the housing, left or right installation position and clearance beside bumper and grille
  • Installation-area review: lens profile and outer edge and electrical plug and pin layout
  • Use a vehicle-side photo to establish the required direction
  • Compare the removed read fog light with the product image before ordering
  • Confirm export packaging for the destination market
  • Availability enquiry: provide units needed and delivery point
  • Fitment review benefits from installation-opening picture plus connector close-up

92405-3W000 / 92406-3W000 Rear Fog Light for KIA Sportage ’11

  • Rear Fog Light matched to the KIA designation KIA Sportage ’11
  • OE cross-reference: 92405-3W000 / 92406-3W000
  • Component identifiers: left or right installation position, clearance beside bumper and grille and lens profile and outer edge
  • Installation-area review: electrical plug and pin layout and mounting tabs around the housing
  • Match the pictured orientation to the actual component position
  • Use the vehicle component as the final physical comparison sample
  • Packing notation: 81 × 41 × 68CM / 10PCS
  • Supply request: include required pieces and receiving location
  • Buyer verification photos: installation-opening picture and connector close-up

92405-3X000 / 92406-3X000 Rear Fog Light for Hyundai Elantra ’11

  • Rear Fog Light application: Hyundai Elantra ’11
  • Retain the removed rear fog light for workshop comparison
  • Capture left or right installation position at the installation area
  • Quotation input: quantity plus destination
  • Confirm clearance beside bumper and grille against the removed part
  • Written references: 92405-3X000 / 92406-3X000
  • Assess the vehicle record before purchasing

92405-3X210 / 92406-3X210 Rear Bumper Lamp for Hyundai Elantra ’14 / Elantra ’16

  • Quotation input: quantity plus destination
  • Packing specification: request with quotation
  • Written references: 92405-3X210 / 92406-3X210
  • Note the vehicle record before purchasing
  • Note left or right installation position against the removed part
  • Evaluate lens profile and outer edge
  • Workshop route: the procurement contact should verify lens profile and outer edge before the delivery plan is confirmed

92405-4H000 / 92406-4H000 Rear Bumper Lamp for Hyundai Starex ’16 / Starex ’18 / H1

  • Check lens profile and outer edge at the installation area
  • Identify the vehicle record before purchasing
  • Packing specification: request with quotation
  • Written references: 92405-4H000 / 92406-4H000
  • Retain the removed rear bumper lamp for workshop comparison
  • Rear Bumper Lamp application: Hyundai Starex ’16 / Starex ’18 / H1
  • Workshop route: the repair planner should document left or right installation position before the fitment decision is signed off

92405-A0000 / 92406-A0000 Bumper Lamp for Hyundai I30 ’12 / Ix25 / Creta

  • Check electrical plug and pin layout against the removed part
  • Check the vehicle record before purchasing
  • Match clearance beside bumper and grille
  • Retain the removed bumper lamp for workshop comparison
  • Bumper Lamp application: Hyundai I30 ’12 / Ix25 / Creta
  • Quotation input: quantity plus destination
  • Workshop route: the parts coordinator should compare left or right installation position before the stock request is released

92405-A5100 / 92406-A5100 Bumper Lamp for Hyundai I30 ’09 / I30 ’12

  • Bumper Lamp application: Hyundai I30 ’09 / I30 ’12
  • Written references: 92405-A5100 / 92406-A5100
  • Quotation input: quantity plus destination
  • Inspect left or right installation position
  • Review lens profile and outer edge at the installation area
  • Review clearance beside bumper and grille
  • Workshop route: the receiving technician should mark left or right installation position before the packing plan is prepared

92405-A7000 / 92406-A7000 Bumper Light for KIA K3 ’13

  • Do a loose trial placement before releasing the 92405-A7000 order
  • Use KIA K3 '13 production details to review 92405-A7000
  • Resolve any edge alignment difference affecting the 92405-A7000 version
  • Review KIA K3 '13 reverse-side ribs for side confirmation
  • Use 92405-A7000 only after connector and mounts agree
  • Treat 92405-A7000 as a cross-reference, not the only fitment test
  • Match 92405-A7000 to the removed sample at every fixing point
  • Component under review: Bumper Light
  • Photograph 92405-A7000 from front and reverse directions

92405-A7500 / 92406-A7500 Rear Bumper Light for KIA K3 ’13 / K3 ’16

  • Resolve any adjacent panel gap difference affecting the 92405-A7500 version
  • Inspect guide slots before preparing a quotation for 92405-A7500
  • Check whether 92405-A7500 matches the photographed KIA K3 '13 / K3 '16 construction
  • Component under review: Rear Bumper Light
  • Provide installed, reverse-side and rear bumper light fixing-point photographs
  • Compare attachment points while reviewing the 92405-A7500 configuration
  • Supply clear fixing-point evidence for the 92405-A7500 enquiry
  • Use a vehicle-side image to confirm 92405-A7500 and adjacent panel gap
  • Verify the rear bumper light attachment points before ordering

92405-AA000 / 92406-AA000 Rear Bumper Lamp for Hyundai Elantra ’21

  • Rear Bumper Lamp application: Hyundai Elantra ’21
  • Match lens profile and outer edge
  • Written references: 92405-AA000 / 92406-AA000
  • Identify electrical plug and pin layout
  • Record mounting tabs around the housing at the installation area
  • Identify left or right installation position against the removed part
  • Workshop route: a vehicle inspector should evaluate lens profile and outer edge before the replacement is test-positioned

92405-B4100 / 92406-B4100 Rear Bumper Lamp for Hyundai I10 ‘2014

  • Packing entry: 82 × 30 × 38CM / 40PCS
  • Retain the removed rear bumper lamp for workshop comparison
  • Rear Bumper Lamp application: Hyundai I10 ‘2014
  • Written references: 92405-B4100 / 92406-B4100
  • Verify mounting tabs around the housing at the installation area
  • Quotation input: quantity plus destination
  • Workshop route: the stock controller should evaluate lens profile and outer edge before the repair schedule is finalized

92405-B4400 / 92406-B4400 Rear Bumper Lamp for Hyundai I10 ‘2014

  • Trace lens profile and outer edge against the removed part
  • Rear Bumper Lamp application: Hyundai I10 ‘2014
  • Check mounting tabs around the housing
  • Document the vehicle record before purchasing
  • Packing specification: request with quotation
  • Retain the removed rear bumper lamp for workshop comparison
  • Workshop route: the service adviser should photograph mounting tabs around the housing before the vehicle is dismantled

PRODUCTS

HOME  /  PRODUCTS