92405-3X210 / 92406-3X210 Rear Bumper Lamp for Hyundai Elantra ’14 / Elantra ’16

Rear Bumper Lamp for Hyundai Elantra ’14 / Elantra ’16: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Workshop Comparison

This rear bumper lamp is associated with Hyundai Elantra ’14 / Elantra ’16. The references 92405-3X210 / 92406-3X210 support identification but do not replace a physical comparison. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille

The procurement contact should verify lens profile and outer edge, trace electrical plug and pin layout, and align clearance beside bumper and grille before the delivery plan is confirmed. This route applies to the rear bumper lamp shown for Hyundai Elantra ’14 / Elantra ’16.

If images accompany the enquiry, include a vehicle-side photograph, a full component outline, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with vehicle-side photograph to verify lens profile and outer edge. A second image should show mounting tabs around the housing from full component outline. Before the delivery plan is confirmed, trace clearance beside bumper and grille and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’14 / Elantra ’16 vehicle record.

The procurement contact should assess mounting tabs around the housing from an installation-opening picture, then mark mounting tabs around the housing before the stock request is released. A collision-repair specialist should trace left or right installation position from a removed-part overview, then trace mounting tabs around the housing before the quotation is approved. The maintenance supervisor should capture lens profile and outer edge from a straight-on view, then review left or right installation position before the delivery plan is confirmed. The receiving technician should note mounting tabs around the housing from an adjacent-panel image, then document mounting tabs around the housing before the delivery plan is confirmed.

Part Recognition Guide

Place old and replacement components side by side, then review every fixing point before installation. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

How should the model application be interpreted?

The stated vehicle is Hyundai Elantra ’14 / Elantra ’16. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What should be compared with the removed component?

Use the old component to check lens profile and outer edge and mounting tabs around the housing. Also state the installation side or position in the enquiry.

What information is needed for a quotation?

A complete sourcing request names the quantity, delivery market and the comparison information used. Include clear original-part photographs when the exact configuration needs further review.