Showing 1645–1656 of 5389 results

86590-A7800 Front Bumper Strip Lower for KIA K3 ’13 / K3 ’16

  • KIA K3 '13 / K3 '16 Front Bumper Strip Lower reference numbers: 86590-A7800
  • Resolve any panel clearance difference affecting the 86590-A7800 version
  • Confirm 86590-A7800 clearances beside surrounding components
  • Treat 86590-A7800 as a cross-reference, not the only fitment test
  • Use panel clearance to distinguish the KIA K3 '13 / K3 '16 front bumper strip lower version
  • State quantity and destination for the KIA K3 '13 / K3 '16 B2B enquiry
  • Verify the front bumper strip lower bracket profile with the vehicle identification data
  • Inspect the front bumper strip lower reverse face before accepting 86590-A7800
  • Record locating holes when checking the KIA K3 '13 / K3 '16 86590-A7800 option

86590-C1000 Front Bumper Strip for Hyundai Sonata ’11-’13 / Sonata ’14

  • Compare lamp or grille openings
  • Written reference: 86590-C1000
  • Review the vehicle record before purchasing
  • Review side-retainer engagement at the installation area
  • Assess upper edge alignment below the lamps against the removed part
  • Retain the removed front bumper strip for workshop comparison
  • Workshop route: the procurement contact should cross-check bracket and bolt-hole spacing before the stock request is released

86591-1W000 Front Bumper Strip for KIA Rio ’10 / Rio ’11 Sedan

  • Front Bumper Strip matched to the KIA designation KIA Rio ’10 / Rio ’11 Sedan
  • OE cross-reference: 86591-1W000
  • Configuration checks: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
  • Position check: upper edge alignment below the lamps and overall corner curvature
  • Use a vehicle-side photo to establish the required direction
  • Check the existing part against the listed KIA Rio ’10 / Rio ’11 Sedan configuration
  • Request carton size and quantity per carton
  • Supply request: include required pieces and receiving location
  • Comparison photographs: capture straight-on view plus removed-part overview

86591-1W200 Front Bumper Strip for KIA Rio’16 Sedan / Rio’11 Hatchback

  • Ask the workshop to compare 86591-1W200 without modifying brackets
  • Use KIA Rio'16 Sedan / Rio'11 Hatchback production details to review 86591-1W200
  • KIA application: Rio'16 Sedan / Rio'11 Hatchback
  • Confirm lens profile, then verify the 86591-1W200 outer edge
  • Match the pictured front bumper strip construction to the original KIA Rio'16 Sedan / Rio'11 Hatchback part
  • Provide installed, reverse-side and front bumper strip fixing-point photographs
  • Use left/right orientation to distinguish the KIA Rio'16 Sedan / Rio'11 Hatchback front bumper strip version
  • Confirm the KIA Rio'16 Sedan / Rio'11 Hatchback front bumper strip front, rear, left or right position where applicable
  • Inspect seal boundary before preparing a quotation for 86591-1W200

86591-2T000 Strip Of Front Bumper for KIA K5 ’11-’13

  • Component under review: Strip Of Front Bumper
  • Use adjacent panel gap to distinguish the KIA K5 '11-'13 strip of front bumper version
  • KIA K5 '11-'13 Strip Of Front Bumper reference numbers: 86591-2T000
  • Resolve any adjacent panel gap difference affecting the 86591-2T000 version
  • Inspect guide slots before preparing a quotation for 86591-2T000
  • Use KIA K5 '11-'13 production details to review 86591-2T000
  • Record guide slots when checking the KIA K5 '11-'13 86591-2T000 option
  • Request current strip of front bumper carton dimensions and pieces per carton
  • State quantity and destination for the KIA K5 '11-'13 B2B enquiry

86591-2T500 Strpe Of Front Bumper for KIA K5 ’14 / K5 ’16

  • Confirm 86591-2T500 clearances beside surrounding components
  • Inspect seal boundary before preparing a quotation for 86591-2T500
  • Do not finalize KIA K5 '14 / K5 '16 strpe of front bumper fitment until lens profile and left/right orientation agree
  • Begin 86591-2T500 selection with a direct mounting-interface comparison
  • Use 86591-2T500 only after connector and mounts agree
  • Match the pictured strpe of front bumper construction to the original KIA K5 '14 / K5 '16 part
  • Treat 86591-2T500 as a cross-reference, not the only fitment test
  • Supply clear fixing-point evidence for the 86591-2T500 enquiry
  • Confirm the KIA K5 '14 / K5 '16 strpe of front bumper front, rear, left or right position where applicable

86591-3S000 / 87771-3S000 / 87772-3S000 Fender Stripe / side Bumper for Hyundai Sonata ’11-’13 / Sonata ’14

  • Quotation input: quantity plus destination
  • Capture upper edge alignment below the lamps at the installation area
  • Examine overall corner curvature against the removed part
  • Written references: 86591-3S000 / 87771-3S000 / 87772-3S000
  • Compare the vehicle record before purchasing
  • Packing specification: request with quotation
  • Workshop route: the service adviser should capture lamp or grille openings before the purchase order is issued

86591-4H700 Front Bumper Strip for Hyundai Starex ’18 / H1 / Tucson

  • Photograph bracket and bolt-hole spacing at the installation area
  • Verify the vehicle record before purchasing
  • Verify upper edge alignment below the lamps
  • Trace overall corner curvature
  • Front Bumper Strip application: Hyundai Starex ’18 / H1 / Tucson
  • Retain the removed front bumper strip for workshop comparison
  • Workshop route: the parts coordinator should evaluate upper edge alignment below the lamps before the repair schedule is finalized

86591-AA000 Front Bumper Lip for Hyundai Elantra ’21

  • Front Bumper Lip application: Hyundai Elantra ’21
  • Measure the vehicle record before purchasing
  • Retain the removed front bumper lip for workshop comparison
  • Quotation input: quantity plus destination
  • Identify side-retainer engagement
  • Evaluate upper edge alignment below the lamps
  • Workshop route: the procurement contact should measure side-retainer engagement before the stock request is released

86591-D4000 Front Bumper Strip Lower for KIA K5 ’16

  • Compare lens profile while reviewing the 86591-D4000 configuration
  • Inspect the front bumper strip lower reverse face before accepting 86591-D4000
  • Resolve any left/right orientation difference affecting the 86591-D4000 version
  • Provide installed, reverse-side and front bumper strip lower fixing-point photographs
  • KIA application: K5 '16
  • Use a vehicle-side image to confirm 86591-D4000 and left/right orientation
  • Photograph 86591-D4000 from front and reverse directions
  • State quantity and destination for the KIA K5 '16 B2B enquiry
  • Keep 86591-D4000 with the vehicle identification photograph

86591-D4200 Front Bumper Strip Lower for KIA K5 ’16 / K5 ’19

  • Confirm the KIA K5 '16 / K5 '19 front bumper strip lower front, rear, left or right position where applicable
  • KIA K5 '16 / K5 '19 Front Bumper Strip Lower reference numbers: 86591-D4200
  • Confirm 86591-D4200 clearances beside surrounding components
  • KIA application: K5 '16 / K5 '19
  • Match the pictured front bumper strip lower construction to the original KIA K5 '16 / K5 '19 part
  • Photograph 86591-D4200 from front and reverse directions
  • Do a loose trial placement before releasing the 86591-D4200 order
  • Use panel clearance to distinguish the KIA K5 '16 / K5 '19 front bumper strip lower version
  • Use a vehicle-side image to confirm 86591-D4200 and panel clearance

86591-D4500 Front Bumper Strip for KIA K5 ’19

  • Inspect the front bumper strip reverse face before accepting 86591-D4500
  • Component under review: Front Bumper Strip
  • Use 86591-D4500 only after connector and mounts agree
  • Record guide slots when checking the KIA K5 '19 86591-D4500 option
  • Confirm 86591-D4500 clearances beside surrounding components
  • Compare the original KIA K5 '19 part with 86591-D4500
  • Supply clear fixing-point evidence for the 86591-D4500 enquiry
  • Use a vehicle-side image to confirm 86591-D4500 and adjacent panel gap
  • Check 86591-D4500 orientation before side selection

PRODUCTS

HOME  /  PRODUCTS