86591-1W000 Front Bumper Strip for KIA Rio ’10 / Rio ’11 Sedan
- Front Bumper Strip matched to the KIA designation KIA Rio ’10 / Rio ’11 Sedan
- OE cross-reference: 86591-1W000
- Configuration checks: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
- Position check: upper edge alignment below the lamps and overall corner curvature
- Use a vehicle-side photo to establish the required direction
- Check the existing part against the listed KIA Rio ’10 / Rio ’11 Sedan configuration
- Request carton size and quantity per carton
- Supply request: include required pieces and receiving location
- Comparison photographs: capture straight-on view plus removed-part overview
Shown here is a front bumper strip for the KIA designation KIA Rio ’10 / Rio ’11 Sedan. The page separates confirmed product data from the checks that still need to be completed on the vehicle.
KIA Product Data
| Component | Front Bumper Strip |
|---|---|
| OEM replacement reference | 86591-1W000 |
| Vehicle designation | KIA Rio ’10 / Rio ’11 Sedan |
| Inspection family | Bumper |
| Version checkpoint | bracket and bolt-hole spacing |
| Vehicle-side checkpoint | upper edge alignment below the lamps |
| Supply format | B2B replacement-parts enquiry |
Reference 86591-1W000 identifies this front-bumper strip for Rio 2010 / Rio 2011 Sedan. Compare the strip length, visible profile, end shape, reverse clip sequence and the curve beside the grille. Photograph the empty bumper channel and measure the distance between the outer retainers before discarding damaged trim. A dry positioning check should show a continuous edge with no bowing or forced clips. Confirm the sedan bumper configuration from a full front image, then send the OEM number, requested quantity, finish requirement and destination for pricing.
Model Association
For catalogue lookup, use 86591-1W000. The number supports identification, while the physical checks below confirm that the pictured construction agrees with the vehicle.
Application is listed as KIA Rio ’10 / Rio ’11 Sedan. Match the actual mounting interface rather than relying on the model label alone.
Visible Features to Compare
Check bracket and bolt-hole spacing in natural alignment rather than forcing the part into position. Document upper edge alignment below the lamps and lamp or grille openings before any modification is considered.
- Bracket and bolt-hole spacing
- Lamp or grille openings
- Side-retainer engagement
Workshop Trial-Fit Plan
The workshop should transfer reusable hardware only after every clip, stud and connector has been matched. Tighten progressively after the product sits evenly and the neighbouring clearances have been accepted.
Before final installation, verify overall corner curvature together with lamp or grille openings.
Wholesale Request Checklist
To prepare supply terms, provide the model designation, quantity, receiving location and a photo of the original marking. Confirm current availability and export packing before scheduling the repair.
No packing value is published here; request current carton dimensions and pieces per carton with the quotation.
Frequently Asked Questions
Which KIA vehicle label belongs with this item?
This front bumper strip is catalogued for KIA Rio ’10 / Rio ’11 Sedan; check the vehicle configuration as well.
Which physical details should a workshop compare?
Confirm the configuration by examining overall corner curvature, bracket and bolt-hole spacing and side-retainer engagement.
What should a distributor send with the order request?
Provide order volume, delivery country, model designation and comparison photographs.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
