86530-2P500 Front Bumper Support for KIA Sorento ’12 / Sorento ’15
- KIA application shown on this page: KIA Sorento ’12 / Sorento ’15
- Identification number: 86530-2P500
- Visual match points: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Mounting check: bracket and bolt-hole spacing and lamp or grille openings
- Use a vehicle-side photo to establish the required direction
- Use front and rear images of the old component to confirm the pictured version
- Packing information: confirm with the current quotation
- Stock enquiry: include requested quantity and destination
- Buyer verification photos: installation-opening picture and underside image
86530-2S000 Front Bumper Frame for Hyundai Tucson ’21 / Ix35 ’10-’12
- Quotation input: quantity plus destination
- Packing specification: request with quotation
- Front Bumper Frame application: Hyundai Tucson ’21 / Ix35 ’10-’12
- Check the vehicle record before purchasing
- Retain the removed front bumper frame for workshop comparison
- Identify upper edge alignment below the lamps
- Workshop route: the service adviser should verify upper edge alignment below the lamps before the commercial request is submitted
86530-2T000 Front Bumper Support for KIA K5 ’11-’13
- Confirm attachment points, then verify the 86530-2T000 outer edge
- Inspect KIA K5 '11-'13 guide slots for side confirmation
- Include 86530-2T000 in the technical approval request
- Do not finalize KIA K5 '11-'13 front bumper support fitment until attachment points and adjacent panel gap agree
- Do a loose trial placement before releasing the 86530-2T000 order
- Provide installed, reverse-side and front bumper support fixing-point photographs
- Match the pictured front bumper support construction to the original KIA K5 '11-'13 part
- State quantity and destination for the KIA K5 '11-'13 B2B enquiry
- Compare the original KIA K5 '11-'13 part with 86530-2T000
86530-2W000 Front Bumper Support for Hyundai Santa Fe ’13
- Retain the removed front bumper support for workshop comparison
- Capture overall corner curvature against the removed part
- Verify the vehicle record before purchasing
- Quotation input: quantity plus destination
- Front Bumper Support application: Hyundai Santa Fe ’13
- Capture side-retainer engagement
- Workshop route: the procurement contact should review lamp or grille openings before the purchase order is issued
86530-3E000 Front Bumper Support for KIA Sorento ’05 / Sorento ’09
- Front Bumper Support supply entry for the KIA model label KIA Sorento ’05 / Sorento ’09
- OE reference shown: 86530-3E000
- Version checkpoints: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
- Mounting-area evidence: bracket and bolt-hole spacing and lamp or grille openings
- Record the mounting position shown by the removed front bumper support
- Check the existing part against the listed KIA Sorento ’05 / Sorento ’09 configuration
- Check packaging against the intended order volume
- Supply request: include required pieces and receiving location
- Useful visual evidence includes original-label photograph with rear mounting view
86530-3K000 Front Bumper Support for Hyundai Sonata ’04
- Retain the removed front bumper support for workshop comparison
- Quotation input: quantity plus destination
- Packing entry: 210 × 46 × 15CM / 1PCS
- Review the vehicle record before purchasing
- Front Bumper Support application: Hyundai Sonata ’04
- Written reference: 86530-3K000
- Workshop route: the procurement contact should verify bracket and bolt-hole spacing before the replacement is test-positioned
86530-3S000 Front Bumper Support for Hyundai Sonata ’11-’13
- Front Bumper Support application: Hyundai Sonata ’11-’13
- Packing specification: request with quotation
- Identify side-retainer engagement
- Evaluate overall corner curvature against the removed part
- Confirm the vehicle record before purchasing
- Written reference: 86530-3S000
- Workshop route: the installation team should verify lamp or grille openings before the purchase order is issued
86530-3W000 Front Bumper Support for KIA Sportage ’11
- KIA front bumper support listed for KIA Sportage ’11
- Searchable OE reference: 86530-3W000
- Version checkpoints: lamp or grille openings, side-retainer engagement and upper edge alignment below the lamps
- Vehicle-side check: overall corner curvature and bracket and bolt-hole spacing
- Match the pictured orientation to the actual component position
- Compare physical geometry rather than selecting from the model name alone
- Ask for packing dimensions when freight is quoted
- Distributor request: add quantity and receiving market
- Workshop images should cover fastener detail and underside image
86530-3X000 Front Bumper Support for Hyundai Elantra ’11 / Elantra ’14
- Written reference: 86530-3X000
- Quotation input: quantity plus destination
- Assess lamp or grille openings
- Retain the removed front bumper support for workshop comparison
- Capture side-retainer engagement
- Cross-check upper edge alignment below the lamps at the installation area
- Workshop route: the service adviser should verify lamp or grille openings before the installation begins
86530-3X210 Front Bumper Support for Hyundai Elantra ’14 / Elantra ’16
- Assess overall corner curvature against the removed part
- Capture the vehicle record before purchasing
- Retain the removed front bumper support for workshop comparison
- Front Bumper Support application: Hyundai Elantra ’14 / Elantra ’16
- Quotation input: quantity plus destination
- Packing specification: request with quotation
- Workshop route: a collision-repair specialist should note lamp or grille openings before the packing plan is prepared
86530-4A000 Front Bumper Supper Lower for Hyundai Starles / Starex
- Quotation input: quantity plus destination
- Assess side-retainer engagement against the removed part
- Packing specification: request with quotation
- Measure lamp or grille openings at the installation area
- Front Bumper Supper Lower application: Hyundai Starles / Starex
- Verify the vehicle record before purchasing
- Workshop route: the stock controller should note overall corner curvature before the quotation is approved
86530-4E000 Front Bumper Support for KIA Bongo ’04 / Bongo ’12-’16 / Bongo’19
- Vehicle designation for this front bumper support: KIA Bongo ’04 / Bongo ’12-’16 / Bongo’19
- OE lookup term: 86530-4E000
- Part recognition points: overall corner curvature, bracket and bolt-hole spacing and lamp or grille openings
- Vehicle fitment check: side-retainer engagement and upper edge alignment below the lamps
- Identify whether one side or a matched pair is required
- Photograph the removed item before dismantling adjacent hardware
- Ask for current carton data with availability
- Availability enquiry: provide units needed and delivery point
- Vehicle-side proof should show full component outline and side-profile photograph
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.