86530-2S000 Front Bumper Frame for Hyundai Tucson ’21 / Ix35 ’10-’12

Front Bumper Frame for Hyundai Tucson ’21 / Ix35 ’10-’12: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This front bumper frame is associated with Hyundai Tucson ’21 / Ix35 ’10-’12. If 86530-2S000 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The service adviser should verify upper edge alignment below the lamps, evaluate overall corner curvature, and mark side-retainer engagement before the commercial request is submitted. This route applies to the front bumper frame shown for Hyundai Tucson ’21 / Ix35 ’10-’12.

If images accompany the enquiry, include a fastener detail, a fastener detail, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with fastener detail to verify upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fastener detail. Before the commercial request is submitted, evaluate side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Tucson ’21 / Ix35 ’10-’12 vehicle record.

A vehicle inspector should align lamp or grille openings from a side-profile photograph, then inspect bracket and bolt-hole spacing before the delivery plan is confirmed. The importing distributor should assess bracket and bolt-hole spacing from an original-label photograph, then align lamp or grille openings before the repair schedule is finalized. The stock controller should record lamp or grille openings from a vehicle-side photograph, then confirm upper edge alignment below the lamps before the packing plan is prepared. The parts coordinator should align overall corner curvature from a rear mounting view, then measure side-retainer engagement before the fitment decision is signed off.

Component Matching Record

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Workshop Comparison

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

The associated model designation is Hyundai Tucson ’21 / Ix35 ’10-’12. Confirm the body or electrical configuration relevant to this front bumper frame.

What evidence is useful for a fitment review?

Ask the workshop to inspect upper edge alignment below the lamps together with bracket and bolt-hole spacing. VIN or chassis information can clarify market-specific differences.

What should be included in a B2B enquiry?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. This information helps separate technical confirmation from the later shipping calculation.