86511-K6000 Front Bumper for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d

Front Bumper for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This front bumper is associated with Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Compare 86511-K6000 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The maintenance supervisor should verify bracket and bolt-hole spacing, mark lamp or grille openings, and measure overall corner curvature before the carton is allocated. This route applies to the front bumper shown for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d.

If images accompany the enquiry, include a lower-retainer view, a removed-part overview, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with lower-retainer view to verify bracket and bolt-hole spacing. A second image should show side-retainer engagement from removed-part overview. Before the carton is allocated, mark overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d vehicle record.

The stock controller should note side-retainer engagement from an original-label photograph, then document bracket and bolt-hole spacing before the quotation is approved. The importing distributor should photograph lamp or grille openings from an original-label photograph, then capture side-retainer engagement before the stock request is released. The receiving technician should capture bracket and bolt-hole spacing from a fastener detail, then photograph bracket and bolt-hole spacing before the purchase order is issued. A body-shop buyer should measure upper edge alignment below the lamps from a lower-retainer view, then record lamp or grille openings before the replacement is test-positioned.

Reference Check

Photograph the original arrangement before removal when several brackets or connectors are involved. No packing entry is published here; request current carton and quantity information with the quotation.

Component Matching Record

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What model is associated with this replacement part?

The recorded application is Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Confirm trim, market specification and the removed front bumper before purchase.

How can an incorrect order be avoided?

Check bracket and bolt-hole spacing, confirm side-retainer engagement, and retain the removed part until the replacement has been compared side by side.

What information helps confirm availability?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Include clear original-part photographs when the exact configuration needs further review.