86612-K6000 Rear Bumper Lower for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d

Rear Bumper Lower for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Reference Check

This rear bumper lower is associated with Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. The numbers 86612-K6000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The parts coordinator should align lamp or grille openings, confirm side-retainer engagement, and confirm bracket and bolt-hole spacing before the repair schedule is finalized. This route applies to the rear bumper lower shown for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d.

If images accompany the enquiry, include a removed-part overview, a connector close-up, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with removed-part overview to align lamp or grille openings. A second image should show upper edge alignment below the lamps from connector close-up. Before the repair schedule is finalized, confirm bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d vehicle record.

The installation team should confirm overall corner curvature from a vehicle-side photograph, then verify side-retainer engagement before the purchase order is issued. The stock controller should note overall corner curvature from a vehicle-side photograph, then record bracket and bolt-hole spacing before the installation begins. A body-shop buyer should measure bracket and bolt-hole spacing from an original-label photograph, then align side-retainer engagement before the quotation is approved. A vehicle inspector should verify overall corner curvature from an installation-opening picture, then trace upper edge alignment below the lamps before the fitment decision is signed off.

Physical Fitment Points

For electrical items, disconnect power according to workshop practice and compare plug orientation first. No packing entry is published here; request current carton and quantity information with the quotation.

Application Review

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

How should the model application be interpreted?

This page associates the rear bumper lower with Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. The vehicle record and original component should agree with the pictured version.

Which details help confirm the correct version?

Photograph lamp or grille openings and the mounting area around upper edge alignment below the lamps. Combine those images with vehicle identification data for review.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Include clear original-part photographs when the exact configuration needs further review.