86531-K6400 Front Bumper Grille for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d

Front Bumper Grille for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Vehicle-Side Evidence

This front bumper grille is associated with Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Use 86531-K6400 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The importing distributor should evaluate side-retainer engagement, confirm upper edge alignment below the lamps, and measure lamp or grille openings before the replacement is test-positioned. This route applies to the front bumper grille shown for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d.

If images accompany the enquiry, include an original-label photograph, an underside image, and an upper-edge image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with original-label photograph to evaluate side-retainer engagement. A second image should show overall corner curvature from underside image. Before the replacement is test-positioned, confirm lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d vehicle record.

The stock controller should cross-check lamp or grille openings from a lower-retainer view, then align side-retainer engagement before the stock request is released. The maintenance supervisor should evaluate upper edge alignment below the lamps from a chassis-plate image, then align upper edge alignment below the lamps before the packing plan is prepared. The stock controller should note overall corner curvature from a full component outline, then capture lamp or grille openings before the vehicle is dismantled. A vehicle inspector should confirm lamp or grille openings from an upper-edge image, then measure lamp or grille openings before the fitment decision is signed off.

Technical Comparison Notes

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.

Physical Fitment Points

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

The associated model designation is Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Confirm the body or electrical configuration relevant to this front bumper grille.

How should fitment be checked before ordering?

Check side-retainer engagement, confirm overall corner curvature, and retain the removed part until the replacement has been compared side by side.

How should a wholesale request be submitted?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Add vehicle details so availability and packing can be checked against the requested version.