86570-K6000 / 86590-K6000 Front Bnumper Strip / Stiffener Assembly Front Bumper for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d

Front Bnumper Strip / Stiffener Assembly Front Bumper for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Reference Check

This front bnumper strip / stiffener assembly front bumper is associated with Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. If 86570-K6000 / 86590-K6000 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The parts coordinator should cross-check overall corner curvature, assess bracket and bolt-hole spacing, and note upper edge alignment below the lamps before the quotation is approved. This route applies to the front bnumper strip / stiffener assembly front bumper shown for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d.

If images accompany the enquiry, include a removed-part overview, a chassis-plate image, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with removed-part overview to cross-check overall corner curvature. A second image should show lamp or grille openings from chassis-plate image. Before the quotation is approved, assess upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d vehicle record.

The service adviser should confirm bracket and bolt-hole spacing from a straight-on view, then document upper edge alignment below the lamps before the shipment is booked. The importing distributor should compare upper edge alignment below the lamps from an upper-edge image, then verify bracket and bolt-hole spacing before the purchase order is issued. The repair planner should document bracket and bolt-hole spacing from a removed-part overview, then record side-retainer engagement before the delivery plan is confirmed. The installation team should evaluate side-retainer engagement from an underside image, then compare lamp or grille openings before the fitment decision is signed off.

Repair Planning Notes

Retain the removed part until the replacement has been visually compared and test-positioned. No packing entry is published here; request current carton and quantity information with the quotation.

Ordering Information

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

How should the model application be interpreted?

This front bnumper strip / stiffener assembly front bumper appears under Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d. Review the exact vehicle version rather than relying on the model name by itself.

What should a workshop inspect before purchase?

Ask the workshop to inspect overall corner curvature together with lamp or grille openings. VIN or chassis information can clarify market-specific differences.

What should be included in a B2B enquiry?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. State the required side or installation position where that detail applies.