86530-2D500 Front Bumpersupport (Steel) for Hyundai Elantra ’04 / Elantra ’07

Front Bumpersupport (Steel) for Hyundai Elantra ’04 / Elantra ’07: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the bumper inspection group.

Product Specifications

Configuration Check

This front bumpersupport (steel) is associated with Hyundai Elantra ’04 / Elantra ’07. The references 86530-2D500 support identification but do not replace a physical comparison. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

A vehicle inspector should measure side-retainer engagement, trace upper edge alignment below the lamps, and measure lamp or grille openings before the installation begins. This route applies to the front bumpersupport (steel) shown for Hyundai Elantra ’04 / Elantra ’07.

If images accompany the enquiry, include a removed-part overview, a chassis-plate image, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with removed-part overview to measure side-retainer engagement. A second image should show overall corner curvature from chassis-plate image. Before the installation begins, trace lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’04 / Elantra ’07 vehicle record.

The stock controller should align side-retainer engagement from an underside image, then verify upper edge alignment below the lamps before the packing plan is prepared. A workshop estimator should review bracket and bolt-hole spacing from an adjacent-panel image, then mark bracket and bolt-hole spacing before the shipment is booked. The repair planner should confirm lamp or grille openings from an upper-edge image, then trace overall corner curvature before the fitment decision is signed off. A body-shop buyer should assess overall corner curvature from a lower-retainer view, then photograph lamp or grille openings before the vehicle is dismantled.

Purchase Preparation

For electrical items, disconnect power according to workshop practice and compare plug orientation first. Recorded packing is 137 × 11 × 23CM / 1PCS; reconfirm current packing when freight is quoted.

Identification Summary

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What is the listed vehicle application?

This page associates the front bumpersupport (steel) with Hyundai Elantra ’04 / Elantra ’07. The vehicle record and original component should agree with the pictured version.

What evidence is useful for a fitment review?

Ask the workshop to inspect side-retainer engagement together with overall corner curvature. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.