86513-2H000 / 86514-2H000 Front Bumper Bracket for Hyundai Elantra ’04 / Elantra ’07

Front Bumper Bracket for Hyundai Elantra ’04 / Elantra ’07: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Pre-Order Inspection

This front bumper bracket is associated with Hyundai Elantra ’04 / Elantra ’07. Retain the complete sequence 86513-2H000 / 86514-2H000 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

A workshop estimator should inspect overall corner curvature, verify bracket and bolt-hole spacing, and evaluate upper edge alignment below the lamps before the commercial request is submitted. This route applies to the front bumper bracket shown for Hyundai Elantra ’04 / Elantra ’07.

If images accompany the enquiry, include an original-label photograph, a lower-retainer view, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with original-label photograph to inspect overall corner curvature. A second image should show lamp or grille openings from lower-retainer view. Before the commercial request is submitted, verify upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’04 / Elantra ’07 vehicle record.

The maintenance supervisor should trace lamp or grille openings from an original-label photograph, then assess lamp or grille openings before the purchase order is issued. The service adviser should confirm upper edge alignment below the lamps from a fastener detail, then measure side-retainer engagement before the installation begins. The service adviser should record upper edge alignment below the lamps from an upper-edge image, then assess overall corner curvature before the carton is allocated. The installation team should note upper edge alignment below the lamps from an original-label photograph, then note side-retainer engagement before the fitment decision is signed off.

Technical Comparison Notes

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What model is associated with this replacement part?

The associated model designation is Hyundai Elantra ’04 / Elantra ’07. Confirm the body or electrical configuration relevant to this front bumper bracket.

What should a workshop inspect before purchase?

Use the old component to check overall corner curvature and lamp or grille openings. Also state the installation side or position in the enquiry.

What information helps confirm availability?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.