94831151 / 94831152 Fog Light for Daewoo Damas-I / Damas-Ii / Cruze ’09

Fog Light for Daewoo Damas-I / Damas-Ii / Cruze ’09: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.

Product Specifications

Repair Planning Notes

This fog light is associated with Daewoo Damas-I / Damas-Ii / Cruze ’09. If 94831151 / 94831152 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position

The procurement contact should evaluate clearance beside bumper and grille, capture lens profile and outer edge, and photograph left or right installation position before the vehicle is dismantled. This route applies to the fog light shown for Daewoo Damas-I / Damas-Ii / Cruze ’09.

If images accompany the enquiry, include a lower-retainer view, an adjacent-panel image, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with lower-retainer view to evaluate clearance beside bumper and grille. A second image should show electrical plug and pin layout from adjacent-panel image. Before the vehicle is dismantled, capture left or right installation position and note any difference from the removed component. Keep these observations with the Daewoo Damas-I / Damas-Ii / Cruze ’09 vehicle record.

The procurement contact should note clearance beside bumper and grille from a straight-on view, then trace lens profile and outer edge before the stock request is released. The maintenance supervisor should note electrical plug and pin layout from a removed-part overview, then record lens profile and outer edge before the delivery plan is confirmed. The installation team should cross-check clearance beside bumper and grille from a chassis-plate image, then mark mounting tabs around the housing before the quotation is approved. A body-shop buyer should verify lens profile and outer edge from an installation-opening picture, then inspect lens profile and outer edge before the carton is allocated.

Identification Summary

Support long or flexible parts evenly during trial fitting so their natural outline can be judged. Recorded packing is 82 × 41 × 31CM / 20PCS; reconfirm current packing when freight is quoted.

Part Recognition Guide

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What model is associated with this replacement part?

The recorded application is Daewoo Damas-I / Damas-Ii / Cruze ’09. Confirm trim, market specification and the removed fog light before purchase.

How can an incorrect order be avoided?

Ask the workshop to inspect clearance beside bumper and grille together with electrical plug and pin layout. VIN or chassis information can clarify market-specific differences.

What should be included in a B2B enquiry?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. This information helps separate technical confirmation from the later shipping calculation.