Front License Plate Panel 53366485 for Jeep Grand Commander K8 2018-2021
- The plate area sits inside a raised rectangular border with rounded corners.
- Four recessed square fixing positions sit apart from four round through-holes.
- Check the fixing pattern against the front bumper and the plate arrangement; no universal plate size is assumed.
Raised Border and Separate Fixing Positions
This front license plate panel presents a broad rectangular face inside a raised perimeter. Its rounded outer corners contrast with four recessed square fixing positions. Four additional round holes are spaced nearer the centre, and the upper edge has a shallow step at either end.
When comparing a replacement, distinguish the recessed positions from the open round holes. Their spacing and the back of the panel are more useful than choosing by rectangular appearance alone.
Front Bumper Panel, Reference 53366485
Reference 53366485 identifies this panel for Jeep Grand Commander K8 2018-2021. Check the original bumper attachment and the dimensions needed for the vehicle plate before ordering. No mounting screws or separate plate are confirmed as included.
Will any national plate format fit this panel?
Dimensions are not provided here. Send the plate size and required fixing spacing so these can be checked.
What if the old panel is missing?
Provide a photograph of the front bumper mounting area and measurements between its attachment points, rather than relying on the model name alone.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
