86511-26000 Front Bumper for Hyundai Santa Fe ’00-’06 / Santa Fe’07-’08

Front Bumper for Hyundai Santa Fe ’00-’06 / Santa Fe’07-’08: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This front bumper is associated with Hyundai Santa Fe ’00-’06 / Santa Fe’07-’08. The OEM entry 86511-26000 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The importing distributor should mark side-retainer engagement, evaluate upper edge alignment below the lamps, and mark lamp or grille openings before the stock request is released. This route applies to the front bumper shown for Hyundai Santa Fe ’00-’06 / Santa Fe’07-’08.

If images accompany the enquiry, include a side-profile photograph, an original-label photograph, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with side-profile photograph to mark side-retainer engagement. A second image should show overall corner curvature from original-label photograph. Before the stock request is released, evaluate lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe ’00-’06 / Santa Fe’07-’08 vehicle record.

The parts coordinator should cross-check bracket and bolt-hole spacing from a side-profile photograph, then evaluate lamp or grille openings before the carton is allocated. The service adviser should photograph bracket and bolt-hole spacing from an original-label photograph, then align upper edge alignment below the lamps before the purchase order is issued. The installation team should evaluate lamp or grille openings from an underside image, then compare bracket and bolt-hole spacing before the vehicle is dismantled. The parts coordinator should assess side-retainer engagement from a straight-on view, then mark overall corner curvature before the packing plan is prepared.

Technical Comparison Notes

Place old and replacement components side by side, then review every fixing point before installation. Recorded packing is 162 × 45 × 46CM / 5PCS; reconfirm current packing when freight is quoted.

Reference Check

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle is this component listed for?

The associated model designation is Hyundai Santa Fe ’00-’06 / Santa Fe’07-’08. Confirm the body or electrical configuration relevant to this front bumper.

What should be compared with the removed component?

Photograph side-retainer engagement and the mounting area around overall corner curvature. Combine those images with vehicle identification data for review.

What information is needed for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.