Front Bumper Mesh Grille for Daewoo N300 / N400 / Cerato ’05

Front Bumper Mesh Grille for Daewoo N300 / N400 / Cerato ’05: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Identification Summary

This front bumper mesh grille is associated with Daewoo N300 / N400 / Cerato ’05. Keep OEM blank on purchase documents unless a number can be read directly from the removed part. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The maintenance supervisor should assess side-retainer engagement, mark upper edge alignment below the lamps, and verify lamp or grille openings before the stock request is released. This route applies to the front bumper mesh grille shown for Daewoo N300 / N400 / Cerato ’05.

If images accompany the enquiry, include a chassis-plate image, an underside image, and an underside image. Label the evidence with the vehicle designation Daewoo N300 / N400 / Cerato ’05 so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with chassis-plate image to assess side-retainer engagement. A second image should show overall corner curvature from underside image. Before the stock request is released, mark lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo N300 / N400 / Cerato ’05 vehicle record.

A collision-repair specialist should evaluate side-retainer engagement from a fastener detail, then review lamp or grille openings before the replacement is test-positioned. The receiving technician should align bracket and bolt-hole spacing from a vehicle-side photograph, then photograph bracket and bolt-hole spacing before the fitment decision is signed off. A workshop estimator should review side-retainer engagement from an underside image, then assess lamp or grille openings before the quotation is approved. The receiving technician should photograph upper edge alignment below the lamps from a removed-part overview, then review upper edge alignment below the lamps before the packing plan is prepared.

Technical Comparison Notes

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 190 × 45 × 45CM / 25SET 54 × 47 × 45CM / 25SET 54 × 47 × 45CM / 25SET; reconfirm current packing when freight is quoted.

Supply Enquiry Details

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

This page associates the front bumper mesh grille with Daewoo N300 / N400 / Cerato ’05. The vehicle record and original component should agree with the pictured version.

What evidence is useful for a fitment review?

Use the old component to check side-retainer engagement and overall corner curvature. Also state the installation side or position in the enquiry.

Which details help prepare shipping terms?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. State the required side or installation position where that detail applies.