Rear Bumper Version B for Daewoo N300 / N400 / Cerato ’05

Rear Bumper Version B for Daewoo N300 / N400 / Cerato ’05: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Pre-Order Inspection

This rear bumper version b is associated with Daewoo N300 / N400 / Cerato ’05. This page does not assign a replacement number where none is supplied; visual checks remain necessary. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The receiving technician should photograph bracket and bolt-hole spacing, review lamp or grille openings, and align overall corner curvature before the fitment decision is signed off. This route applies to the rear bumper version b shown for Daewoo N300 / N400 / Cerato ’05.

If images accompany the enquiry, include an original-label photograph, an adjacent-panel image, and a full component outline. Label the evidence with the vehicle designation Daewoo N300 / N400 / Cerato ’05 so the workshop and purchasing team review one configuration.

The receiving technician can begin with original-label photograph to photograph bracket and bolt-hole spacing. A second image should show side-retainer engagement from adjacent-panel image. Before the fitment decision is signed off, review overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo N300 / N400 / Cerato ’05 vehicle record.

The procurement contact should capture overall corner curvature from an adjacent-panel image, then inspect bracket and bolt-hole spacing before the carton is allocated. The maintenance supervisor should trace lamp or grille openings from a vehicle-side photograph, then measure side-retainer engagement before the delivery plan is confirmed. A vehicle inspector should align overall corner curvature from a straight-on view, then evaluate lamp or grille openings before the commercial request is submitted. The receiving technician should record bracket and bolt-hole spacing from a connector close-up, then assess lamp or grille openings before the vehicle is dismantled.

Inspection Route

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What model is associated with this replacement part?

Application information points to Daewoo N300 / N400 / Cerato ’05. A workshop should still compare the removed item and mounting location before ordering.

What evidence is useful for a fitment review?

Fitment evidence should show bracket and bolt-hole spacing, side-retainer engagement and the position where the component will be installed.

What information helps confirm availability?

A complete sourcing request names the quantity, delivery market and the comparison information used. Add vehicle details so availability and packing can be checked against the requested version.