Showing 1153–1164 of 5085 results

86522-A7000 Front Bumper Grille for KIA K3 ’13 / K3 ’16

  • Match 86522-A7000 to the removed sample at every fixing point
  • Do not finalize KIA K3 '13 / K3 '16 front bumper grille fitment until overall dimensions and service access agree
  • Check whether 86522-A7000 matches the photographed KIA K3 '13 / K3 '16 construction
  • Use KIA K3 '13 / K3 '16 production details to review 86522-A7000
  • Provide installed, reverse-side and front bumper grille fixing-point photographs
  • Keep 86522-A7000 with the vehicle identification photograph
  • Resolve any service access difference affecting the 86522-A7000 version
  • Confirm overall dimensions, then verify the 86522-A7000 outer edge
  • Match the pictured front bumper grille construction to the original KIA K3 '13 / K3 '16 part

86522-A7810 Bumper Grille for KIA K3 ’13 / K3 ’16

  • Supply clear fixing-point evidence for the 86522-A7810 enquiry
  • Record locating holes when checking the KIA K3 '13 / K3 '16 86522-A7810 option
  • Inspect the bumper grille reverse face before accepting 86522-A7810
  • Keep 86522-A7810 with the vehicle identification photograph
  • Match 86522-A7810 to the removed sample at every fixing point
  • Resolve any panel clearance difference affecting the 86522-A7810 version
  • Component under review: Bumper Grille
  • Treat 86522-A7810 as a cross-reference, not the only fitment test
  • State quantity and destination for the KIA K3 '13 / K3 '16 B2B enquiry

86523-0X000 / 86524-0X000 Front Apron for Hyundai Mega Truck / I10 ’07

  • Front Apron application: Hyundai Mega Truck / I10 ’07
  • Note mounting pattern
  • Compare original-part markings against the removed part
  • Retain the removed front apron for workshop comparison
  • Written references: 86523-0X000 / 86524-0X000
  • Quotation input: quantity plus destination
  • Workshop route: a body-shop buyer should assess mounting pattern before the delivery plan is confirmed

86523-1G600 Front Bumper for KIA Rio ’10 / Rio ’11 Sedan

  • Vehicle designation for this front bumper: KIA Rio ’10 / Rio ’11 Sedan
  • OE lookup term: 86523-1G600
  • Visual match points: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
  • Position check: bracket and bolt-hole spacing and lamp or grille openings
  • Specify the installation side in the KIA Rio ’10 / Rio ’11 Sedan quotation request
  • Compare the removed front bumper with the product image before ordering
  • Carton record: 110 × 30 × 17CM / 5PCS
  • Availability enquiry: provide units needed and delivery point
  • Fitment review benefits from lower-retainer view plus rear mounting view

86523-1W700 / 86524-1W700 Fog Light Cover for KIA Rio’11 Hatchback / Rio’16 Hatchback

  • KIA application: Rio'11 Hatchback / Rio'16 Hatchback
  • Confirm 86523-1W700 clearances beside surrounding components
  • Confirm retaining clips, then verify the 86523-1W700 outer edge
  • Photograph 86523-1W700 from front and reverse directions
  • Check whether 86523-1W700 matches the photographed KIA Rio'11 Hatchback / Rio'16 Hatchback construction
  • Begin 86523-1W700 selection with a direct mounting-interface comparison
  • Check the fog light cover retaining clips with clear close-up photographs
  • Treat 86523-1W700 as a cross-reference, not the only fitment test
  • Provide installed, reverse-side and fog light cover fixing-point photographs

86523-1Y000 / 86524-1Y000 Fog Light Cover for KIA Picanto ’11

  • KIA fog light cover listed for KIA Picanto ’11
  • Searchable OE references: 86523-1Y000 / 86524-1Y000
  • Required inspection items: lens profile and outer edge, electrical plug and pin layout and mounting tabs around the housing
  • Vehicle-side check: left or right installation position and clearance beside bumper and grille
  • Specify the installation side in the KIA Picanto ’11 quotation request
  • Keep the original fog light cover available for a side-by-side review
  • Ask for current carton data with availability
  • B2B enquiry: send order volume and delivery country
  • Show the mounting configuration using removed-part overview plus lower-retainer view

86523-1Y500 / 86524-1Y500 Fog Light Cover for KIA Picanto ’14 / Picanto ’16

  • Fog Light Cover supply entry for the KIA model label KIA Picanto ’14 / Picanto ’16
  • OE reference shown: 86523-1Y500 / 86524-1Y500
  • Component identifiers: electrical plug and pin layout, mounting tabs around the housing and left or right installation position
  • Interface review: clearance beside bumper and grille and lens profile and outer edge
  • Confirm component location before stock is allocated
  • Use front and rear images of the old component to confirm the pictured version
  • Request carton size and quantity per carton
  • Order planning data: required units and receiving country
  • Comparison photographs: capture removed-part overview plus rear mounting view

86523-2B700 / 86524-2B700 Fog Light Cover Pitted Surface for Hyundai Santa Fe ’09

  • Assess clearance beside bumper and grille at the installation area
  • Examine left or right installation position
  • Written references: 86523-2B700 / 86524-2B700
  • Review mounting tabs around the housing
  • Identify lens profile and outer edge against the removed part
  • Retain the removed fog light cover pitted surface for workshop comparison
  • Workshop route: a collision-repair specialist should record mounting tabs around the housing before the fitment decision is signed off

86523-2BAA0 / 86524-2BAA0 Fog Light Cover Bright Surface for Hyundai Santa Fe ’09

  • Compare mounting tabs around the housing against the removed part
  • Confirm electrical plug and pin layout at the installation area
  • Fog Light Cover Bright Surface application: Hyundai Santa Fe ’09
  • Measure the vehicle record before purchasing
  • Retain the removed fog light cover bright surface for workshop comparison
  • Quotation input: quantity plus destination
  • Workshop route: the service adviser should verify clearance beside bumper and grille before the vehicle is dismantled

86523-2F500 / 86524-2F500 Fog Light Cover for KIA Cerato ’05 / Cerato ’07

  • Fog Light Cover matched to the KIA designation KIA Cerato ’05 / Cerato ’07
  • OE cross-reference: 86523-2F500 / 86524-2F500
  • Required inspection items: lens profile and outer edge, electrical plug and pin layout and mounting tabs around the housing
  • Position check: left or right installation position and clearance beside bumper and grille
  • Match the pictured orientation to the actual component position
  • Compare the removed fog light cover with the product image before ordering
  • Ask for packing dimensions when freight is quoted
  • Distributor request: add quantity and receiving market
  • Useful visual evidence includes rear mounting view with corner-profile view

86523-2H001 / 86524-2H001 Fog Light Blanking Cover for Hyundai Elantra ’04 / Elantra ’07

  • Retain the removed fog light blanking cover for workshop comparison
  • Packing specification: request with quotation
  • Fog Light Blanking Cover application: Hyundai Elantra ’04 / Elantra ’07
  • Identify clearance beside bumper and grille against the removed part
  • Written references: 86523-2H001 / 86524-2H001
  • Quotation input: quantity plus destination
  • Cross-check mounting tabs around the housing

86523-2P510 / 86524-2P510 Fog Light Cover for KIA Sorento ’09 / Sorento ’12

  • KIA fog light cover listed for KIA Sorento ’09 / Sorento ’12
  • Searchable OE references: 86523-2P510 / 86524-2P510
  • Required inspection items: lens profile and outer edge, electrical plug and pin layout and mounting tabs around the housing
  • Mounting-area evidence: left or right installation position and clearance beside bumper and grille
  • Confirm component location before stock is allocated
  • Compare the removed fog light cover with the product image before ordering
  • Obtain current packing details before shipment planning
  • Order planning data: required units and receiving country
  • Show the mounting configuration using lower-retainer view plus installation-opening picture

PRODUCTS

HOME  /  PRODUCTS