Engine Cover for KIA Sportage ’08
- Engine Cover matched to the KIA designation KIA Sportage ’08
- No OE number is stated; identify the item from its photographed configuration
- Part recognition points: edge overlap, installation orientation and perimeter outline
- Attachment review: fastener holes and clip locations
- Verify orientation at the KIA Sportage ’08 installation area before purchase
- Use the vehicle component as the final physical comparison sample
- Ask for packing dimensions when freight is quoted
- Distributor request: add quantity and receiving market
- Vehicle-side proof should show full component outline and full component outline
Engine Cover for NISSAN Sunny ’11 / Sunny ’14
- Use a vehicle-side image to confirm Engine Cover and edge alignment
- Include Engine Cover in the technical approval request
- Use NISSAN Sunny '11 / Sunny '14 production details to review Engine Cover
- Confirm retaining clips, then verify the Engine Cover outer edge
- Use edge alignment to distinguish the NISSAN Sunny '11 / Sunny '14 engine cover version
- Match Engine Cover to the removed sample at every fixing point
- Match the pictured engine cover construction to the original NISSAN Sunny '11 / Sunny '14 part
- Check Engine Cover orientation before side selection
- State quantity and destination for the NISSAN Sunny '11 / Sunny '14 B2B enquiry
Engine Cover(2.0l) for KIA Sportage ’08
- Engine Cover(2.0l) matched to the KIA designation KIA Sportage ’08
- No OE number is stated; identify the item from its photographed configuration
- Version checkpoints: fastener holes, clip locations and edge overlap
- Mounting-area evidence: installation orientation and perimeter outline
- Confirm the required left, right, front or rear installation position
- Compare physical geometry rather than selecting from the model name alone
- Carton information is supplied with live availability
- Supply request: include required pieces and receiving location
- Comparison photographs: capture side-profile photograph plus full component outline
Engine Cover(2.5/3.5) for Hyundai Terracan ’04 / Shehzore ’99 Pick Up
- Confirm fastener holes against the removed part
- Retain the removed engine cover(2.5/3.5) for workshop comparison
- Measure orientation before installation
- Verify the vehicle record before purchasing
- Assess the photographed shape and fixing layout
Engine Protection Board for NISSAN Sunny ’11 / Sunny ’14
- State quantity and destination for the NISSAN Sunny '11 / Sunny '14 B2B enquiry
- Check Engine Protection Board orientation before side selection
- Ask the workshop to compare Engine Protection Board without modifying brackets
- Use NISSAN Sunny '11 / Sunny '14 production details to review Engine Protection Board
- Begin Engine Protection Board selection with a direct mounting-interface comparison
- Confirm overall dimensions, then verify the Engine Protection Board outer edge
- Measure the engine protection board overall dimensions at the vehicle opening
- Match Engine Protection Board to the removed sample at every fixing point
- Check whether Engine Protection Board matches the photographed NISSAN Sunny '11 / Sunny '14 construction
Enging Cover Board for TOYOTA Corolla ’08 / Corolla ’11
- Keep the original component until panel alignment is verified
- Hold a mismatched item from workshop use and document locating holes
- Add a ruler reference when mounting-point spacing cannot be judged from a photograph
- Check locating holes without bending brackets or clips
- Provide the application, quantity and ship-to country in the B2B enquiry
- Packing information is not supplied in the source row
- The empty OE cell must remain empty until a verified source is provided
- The worksheet associates this item with TOYOTA Corolla '08 / Corolla '11
- Use panel alignment to separate similar-looking versions
Excel’95 Front Bumper Stripr for Hyundai Santa Fe ’21 / Excel’92-’95
- Packing entry: 145 × 28 × 23CM / 5PCS
- Retain the removed excel’95 front bumper stripr for workshop comparison
- Check lamp or grille openings against the removed part
- Excel’95 Front Bumper Stripr application: Hyundai Santa Fe ’21 / Excel’92-’95
- Quotation input: quantity plus destination
- Cross-check upper edge alignment below the lamps
- Workshop route: a workshop estimator should trace upper edge alignment below the lamps before the replacement is test-positioned
Export-Packed Bus-Changing Mirror Version A for KIA Picanto ’21 / Pergio / Pergio ’05
- Export-Packed Bus-Changing Mirror Version A application: KIA Picanto ’21 / Pergio / Pergio ’05
- This entry carries no OE reference; confirm the visible version before purchase
- Fitment identifiers: left or right door position, door-base footprint and mounting stud pattern
- Vehicle opening check: manual or electric adjustment type and connector shape and pin count
- Record the mounting position shown by the removed bus-changing mirror
- Review the complete product image beside the part taken from the vehicle
- Packing reference: 70 × 34.5 × 38CM / 20PCS
- Quotation details: required quantity and destination
- Show the mounting configuration using corner-profile view plus side-profile photograph
Export-Packed Door Moulding Version A for KIA Rio ’05
- Door Moulding matched to the KIA designation KIA Rio ’05
- No OE number is stated; identify the item from its photographed configuration
- Selection criteria: clip or fastener arrangement, door or bumper position and visible contour and finish
- Interface review: mounting-hole spacing and base footprint
- Record the mounting position shown by the removed door moulding
- Use the vehicle component as the final physical comparison sample
- Packing notation: 110 × 26 × 26CM / 10SET
- Quotation details: required quantity and destination
- Fitment review benefits from removed-part overview plus chassis-plate image
Export-Packed Fog Light for KIA Picanto ’21 / Pergio / Pergio ’05
- KIA application shown on this page: KIA Picanto ’21 / Pergio / Pergio ’05
- OE field is blank, so selection must follow the image and mounting layout
- Visual match points: clearance beside bumper and grille, lens profile and outer edge and electrical plug and pin layout
- Position verification: mounting tabs around the housing and left or right installation position
- Verify required orientation against the original part
- Retain the original item until the replacement version is accepted
- Shipping pack: 68 × 35 × 54CM / 40PCS
- Stock enquiry: include requested quantity and destination
- Use corner-profile view together with lower-retainer view for configuration review
Exterior Door Handle for Hyundai Terracan ’04 / Shehzore ’99 Pick Up
- Quotation input: quantity plus destination
- Exterior Door Handle application: Hyundai Terracan ’04 / Shehzore ’99 Pick Up
- Confirm the vehicle record before purchasing
- Assess original-part photograph comparison at the installation area
- Examine base footprint against the removed part
Fan – Offset Shroud for Hyundai Santa Fe ’13 / Santa Fe’16
- Cross-check mounting-leg positions at the installation area
- Retain the removed fan – offset shroud for workshop comparison
- Quotation input: quantity plus destination
- Photograph overall depth against the removed part
- Packing specification: request with quotation
- Fan – Offset Shroud application: Hyundai Santa Fe ’13 / Santa Fe’16
- Workshop route: a workshop estimator should confirm frame dimensions before the installation begins
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.