Electric Fan for FORD Fiesta / Fiesta ’09
- Ask the workshop to compare Electric Fan without modifying brackets
- Use a vehicle-side image to confirm Electric Fan and panel clearance
- Compare bracket profile while reviewing the Electric Fan configuration
- Confirm the FORD Fiesta / Fiesta '09 electric fan front, rear, left or right position where applicable
- Resolve any panel clearance difference affecting the Electric Fan version
- FORD Fiesta / Fiesta '09 Electric Fan OEM number is not confirmed; use physical comparison
- Do a loose trial placement before releasing the Electric Fan order
- Use Electric Fan only after connector and mounts agree
- Check whether Electric Fan matches the photographed FORD Fiesta / Fiesta '09 construction
Electric Fan Shroud for FORD Fiesta / Fiesta ’09
- Provide installed, reverse-side and electric fan shroud fixing-point photographs
- Compare attachment points while reviewing the Electric Fan Shroud configuration
- Supply clear fixing-point evidence for the Electric Fan Shroud enquiry
- Confirm attachment points, then verify the Electric Fan Shroud outer edge
- Do not finalize FORD Fiesta / Fiesta '09 electric fan shroud fitment until attachment points and adjacent panel gap agree
- Check Electric Fan Shroud orientation before side selection
- Review the FORD Fiesta / Fiesta '09 opening before approving Electric Fan Shroud
- Use adjacent panel gap to distinguish the FORD Fiesta / Fiesta '09 electric fan shroud version
- Component under review: Electric Fan Shroud
Electric Headlight Assembly for Hyundai Elantra ’11 / Elantra ’14
- Electric Headlight Assembly application: Hyundai Elantra ’11 / Elantra ’14
- Check the photographed shape because the OEM field is blank
- Assess lens profile and outer edge at the installation area
- Retain the removed electric headlight assembly for workshop comparison
- Document the vehicle record before purchasing
- Quotation input: quantity plus destination
- Document clearance beside bumper and grille
Empennage for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05
- Document mounting pattern against the removed part
- Retain the removed empennage for workshop comparison
- Cross-check the photographed shape because the OEM field is blank
- Trace original-part markings
- Inspect installation orientation
- Inspect overall dimensions at the installation area
- Workshop route: the installation team should verify installation orientation before the replacement is test-positioned
Empennage for KIA Forte
- KIA empennage listed for KIA Forte
- OE reference not listed; the photographed profile is the primary identifier
- Key matching points: original-part markings, overall dimensions and mounting pattern
- Vehicle-side check: connector details when applicable and installation orientation
- Specify the installation side in the KIA Forte quotation request
- Use front and rear images of the old component to confirm the pictured version
- Ask for current carton data with availability
- B2B enquiry: send order volume and delivery country
- A clear upper-edge image should accompany the chassis-plate image
Engine 1.6 Cover for Daewoo Nubira / Lacetti ’03 / Optra
- Trace the photographed shape because the OEM field is blank
- Assess edge overlap
- Retain the removed engine 1.6 cover for workshop comparison
- Quotation input: quantity plus destination
- Identify installation orientation
- Evaluate perimeter outline at the installation area
- Workshop route: a body-shop buyer should review edge overlap before the delivery plan is confirmed
Engine 1.8 Cover for Daewoo Nubira / Lacetti ’03 / Optra
- Inspect the photographed shape because the OEM field is blank
- Examine perimeter outline against the removed part
- Compare installation orientation at the installation area
- Retain the removed engine 1.8 cover for workshop comparison
- Engine 1.8 Cover application: Daewoo Nubira / Lacetti ’03 / Optra
- Capture the vehicle record before purchasing
- Workshop route: the receiving technician should capture clip locations before the packing plan is prepared
Engine Apron 2.7l for Hyundai Tucson
- Cross-check mounting pattern
- Note connector details when applicable at the installation area
- Assess the vehicle record before purchasing
- Examine overall dimensions
- Packing specification: request with quotation
- Verify the photographed shape because the OEM field is blank
- Workshop route: a vehicle inspector should capture overall dimensions before the fitment decision is signed off
Engine Apron for KIA Rio ’05 / Rio ’10
- Engine Apron matched to the KIA designation KIA Rio ’05 / Rio ’10
- No OE number is stated; identify the item from its photographed configuration
- Version checkpoints: original-part markings, overall dimensions and mounting pattern
- Position check: connector details when applicable and installation orientation
- Include the exact installation position with the vehicle details
- Retain the original item until the replacement version is accepted
- Packing information: confirm with the current quotation
- Commercial request: identify volume and delivery location
- Vehicle-side proof should show upper-edge image and straight-on view
Engine Board for NISSAN March / Nv200
- Review the NISSAN March / Nv200 opening before approving Engine Board
- Match the pictured engine board construction to the original NISSAN March / Nv200 part
- Compare the original NISSAN March / Nv200 part with Engine Board
- Use Engine Board only after connector and mounts agree
- Record locating holes when checking the NISSAN March / Nv200 Engine Board option
- Inspect locating holes before preparing a quotation for Engine Board
- Keep Engine Board with the vehicle identification photograph
- Use a vehicle-side image to confirm Engine Board and panel clearance
- State quantity and destination for the NISSAN March / Nv200 B2B enquiry
Engine Board for TOYOTA Rocco ’21 / Land Cruiser FJ70 ’07 / Probox ’02-’08
- Check corner geometry without bending brackets or clips
- Place the original and replacement side by side to review overall dimensions
- Confirm carton size and quantity per carton before freight calculation
- Verify the delivered side and configuration before checking service access
- Keep a vehicle identification image with the component comparison photographs
- Check the front and reverse views for differences in overall dimensions
- Add destination details after fitment and side selection are complete
- Match the image to the TOYOTA Rocco '21 / Land Cruiser FJ70 '07 / Probox '02-'08 vehicle record
- The empty OE cell must remain empty until a verified source is provided
Engine Boarding for FORD Focus ’05
- Check Engine Boarding orientation before side selection
- Match the pictured engine boarding construction to the original FORD Focus '05 part
- Treat Engine Boarding as a cross-reference, not the only fitment test
- Record fastener spacing when checking the FORD Focus '05 Engine Boarding option
- Supply clear fixing-point evidence for the Engine Boarding enquiry
- Do a loose trial placement before releasing the Engine Boarding order
- Request current engine boarding carton dimensions and pieces per carton
- Provide installed, reverse-side and engine boarding fixing-point photographs
- Review the FORD Focus '05 opening before approving Engine Boarding
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.