Showing 3253–3264 of 5389 results

96417180 Rear Linner Fender for Daewoo Kalos ’02 / Aveo ’08

  • Written reference: 96417180
  • Review wheel-arch or lamp clearance against the removed part
  • Quotation input: quantity plus destination
  • Assess bolt and clip locations at the installation area
  • Identify left or right orientation
  • Inspect panel contour
  • Workshop route: the service adviser should measure left or right orientation before the carton is allocated

96425978 Oil Pot (For Optra’03 / Aevo’07) for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

  • Confirm installation orientation at the installation area
  • Note the vehicle record before purchasing
  • Note mounting pattern
  • Oil Pot (For Optra’03 / Aevo’07) application: Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti
  • Written reference: 96425978
  • Packing specification: request with quotation
  • Workshop route: the importing distributor should review mounting pattern before the vehicle is dismantled

96428957 Front Bumper Frame Work for Daewoo Magnus ’02 / Magnus ’07

  • Verify the vehicle record before purchasing
  • Verify side-retainer engagement
  • Note bracket and bolt-hole spacing against the removed part
  • Retain the removed front bumper frame work for workshop comparison
  • Written reference: 96428957
  • Quotation input: quantity plus destination
  • Workshop route: the parts coordinator should measure side-retainer engagement before the quotation is approved

96430973 / 96430974 Headlight Assembly Support for Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra

  • Packing specification: request with quotation
  • Written references: 96430973 / 96430974
  • Quotation input: quantity plus destination
  • Headlight Assembly Support application: Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra
  • Trace lens profile and outer edge
  • Inspect the vehicle record before purchasing
  • Workshop route: the stock controller should mark lens profile and outer edge before the purchase order is issued

96438751 Boot Board for Daewoo Aveo ’05 / Aveo ’14

  • Note overall dimensions
  • Cross-check mounting pattern
  • Check the vehicle record before purchasing
  • Packing specification: request with quotation
  • Review installation orientation against the removed part
  • Written reference: 96438751
  • Workshop route: a vehicle inspector should record overall dimensions before the repair schedule is finalized

96458814 / 96458813 Side Marker Light for Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra

  • Written references: 96458814 / 96458813
  • Retain the removed side marker light for workshop comparison
  • Quotation input: quantity plus destination
  • Packing entry: 34 × 31 × 15CM / 100PCS
  • Side Marker Light application: Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra
  • Match the vehicle record before purchasing
  • Workshop route: a workshop estimator should align clearance beside bumper and grille before the purchase order is issued

96458816 / 96458815 Headlight Assembly for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

  • Retain the removed headlight assembly for workshop comparison
  • Match electrical plug and pin layout against the removed part
  • Confirm lens profile and outer edge at the installation area
  • Quotation input: quantity plus destination
  • Packing entry: 59 × 59 × 38CM / 4PCS
  • Headlight Assembly application: Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti
  • Workshop route: the installation team should measure left or right installation position before the installation begins

96458820 / 96458810 / 96458819 / 96458809 Headlight Assembly for Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra

  • Photograph left or right installation position
  • Headlight Assembly application: Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra
  • Written references: 96458820 / 96458810 / 96458819 / 96458809
  • Quotation input: quantity plus destination
  • Photograph electrical plug and pin layout against the removed part
  • Evaluate clearance beside bumper and grille
  • Workshop route: the repair planner should evaluate left or right installation position before the carton is allocated

96460275 / 96460276 Tail Light Assembly for Daewoo Lanos I / Ii

  • Quotation input: quantity plus destination
  • Evaluate mounting tabs around the housing against the removed part
  • Packing entry: 75 × 30 × 72CM / 10PCS
  • Note the vehicle record before purchasing
  • Measure lens profile and outer edge
  • Tail Light Assembly application: Daewoo Lanos I / Ii
  • Workshop route: the procurement contact should trace clearance beside bumper and grille before the quotation is approved

96462969 / 96462970 Rear Fender for Daewoo Aveo ’05

  • Capture bolt and clip locations against the removed part
  • Record left or right orientation
  • Measure panel contour at the installation area
  • Written references: 96462969 / 96462970
  • Retain the removed rear fender for workshop comparison
  • Measure the vehicle record before purchasing
  • Workshop route: a workshop estimator should cross-check opening and hole pattern before the stock request is released

9646931 / 96464932 / 9646953 / 96464954 Liner Fender for Daewoo Aveo ’05 / Aveo ’14

  • Quotation input: quantity plus destination
  • Match left or right orientation
  • Photograph bolt and clip locations against the removed part
  • Packing entry: 105 × 28 × 20CM / 10PCS
  • Liner Fender application: Daewoo Aveo ’05 / Aveo ’14
  • Confirm the vehicle record before purchasing
  • Workshop route: the parts coordinator should photograph opening and hole pattern before the vehicle is dismantled

96470092 / 96470091 Headlight Assembly for Daewoo Magnus ’02 / Magnus ’07

  • Document clearance beside bumper and grille
  • Cross-check electrical plug and pin layout at the installation area
  • Written references: 96470092 / 96470091
  • Note lens profile and outer edge
  • Confirm mounting tabs around the housing against the removed part
  • Document the vehicle record before purchasing
  • Workshop route: the service adviser should measure clearance beside bumper and grille before the replacement is test-positioned

PRODUCTS

HOME  /  PRODUCTS