Showing 3001–3012 of 5389 results

92403-L2000 Tail Light Assembly for KIA K5 ’19 / K5 ’21

  • Component under review: Tail Light Assembly
  • Record corner geometry when checking the KIA K5 '19 / K5 '21 92403-L2000 option
  • State quantity and destination for the KIA K5 '19 / K5 '21 B2B enquiry
  • Include 92403-L2000 in the technical approval request
  • Photograph 92403-L2000 from front and reverse directions
  • KIA K5 '19 / K5 '21 Tail Light Assembly reference numbers: 92403-L2000
  • KIA application: K5 '19 / K5 '21
  • Begin 92403-L2000 selection with a direct mounting-interface comparison
  • Request current tail light assembly carton dimensions and pieces per carton

92403-L2120 Tail Light Assembly for KIA K5 ’21 Sport / K3 ’13

  • Inspect the tail light assembly reverse face before accepting 92403-L2120
  • Provide installed, reverse-side and tail light assembly fixing-point photographs
  • Use a vehicle-side image to confirm 92403-L2120 and adjacent panel gap
  • Measure the tail light assembly attachment points with clear close-up photographs
  • Photograph 92403-L2120 from front and reverse directions
  • State quantity and destination for the KIA K5 '21 Sport / K3 '13 B2B enquiry
  • Check whether 92403-L2120 matches the photographed KIA K5 '21 Sport / K3 '13 construction
  • Record guide slots when checking the KIA K5 '21 Sport / K3 '13 92403-L2120 option
  • Do not finalize KIA K5 '21 Sport / K3 '13 tail light assembly fitment until attachment points and adjacent panel gap agree

92403-M6000 / 92404-M6000 Tail Light Inner for KIA K3 ’16 / K3’19

  • Check the tail light inner outer contour against the removed component
  • KIA application: K3 '16 / K3'19
  • Use vehicle aperture to distinguish the KIA K3 '16 / K3'19 tail light inner version
  • Supply clear fixing-point evidence for the 92403-M6000 enquiry
  • Check whether 92403-M6000 matches the photographed KIA K3 '16 / K3'19 construction
  • KIA K3 '16 / K3'19 Tail Light Inner reference numbers: 92403-M6000 / 92404-M6000
  • State quantity and destination for the KIA K3 '16 / K3'19 B2B enquiry
  • Include 92403-M6000 in the technical approval request
  • Compare the original KIA K3 '16 / K3'19 part with 92403-M6000

92403-M6100 / 92404-M6100 Tail Light Inner Led for KIA K3 ’16 / K3’19

  • Confirm the KIA K3 '16 / K3'19 tail light inner led front, rear, left or right position where applicable
  • Begin 92403-M6100 selection with a direct mounting-interface comparison
  • Include 92403-M6100 in the technical approval request
  • Request current tail light inner led carton dimensions and pieces per carton
  • Match the pictured tail light inner led construction to the original KIA K3 '16 / K3'19 part
  • Keep 92403-M6100 with the vehicle identification photograph
  • Review the KIA K3 '16 / K3'19 opening before approving 92403-M6100
  • Check whether 92403-M6100 matches the photographed KIA K3 '16 / K3'19 construction
  • Supply clear fixing-point evidence for the 92403-M6100 enquiry

92403-M6200 / 92404-M6200 Tail Light Outer for KIA K3’19 / K3’19 GT 5D / K3 ’21

  • Check KIA K3'19 / K3'19 GT 5D / K3 '21 seal boundary for installation planning
  • Confirm lens profile, then verify the 92403-M6200 outer edge
  • Include 92403-M6200 in the technical approval request
  • Compare the tail light outer lens profile with clear close-up photographs
  • State quantity and destination for the KIA K3'19 / K3'19 GT 5D / K3 '21 B2B enquiry
  • Request current tail light outer carton dimensions and pieces per carton
  • Inspect the tail light outer reverse face before accepting 92403-M6200
  • Resolve any left/right orientation difference affecting the 92403-M6200 version
  • Use KIA K3'19 / K3'19 GT 5D / K3 '21 production details to review 92403-M6200

92403-N9000 Tail Light Assembly M for Hyundai Tucson ’21

  • Packing specification: request with quotation
  • Tail Light Assembly M application: Hyundai Tucson ’21
  • Check left or right installation position
  • Confirm mounting tabs around the housing
  • Retain the removed tail light assembly m for workshop comparison
  • Cross-check the vehicle record before purchasing
  • Workshop route: the maintenance supervisor should photograph mounting tabs around the housing before the fitment decision is signed off

92403-P1000 / 92404-P1000 Inner Tail Light Assembly for KIA Kx5 / Sportage ’21

  • Inner Tail Light Assembly supply entry for the KIA model label KIA Kx5 / Sportage ’21
  • OE reference shown: 92403-P1000 / 92404-P1000
  • Physical comparison: clearance beside bumper and grille, lens profile and outer edge and electrical plug and pin layout
  • Mounting-area evidence: mounting tabs around the housing and left or right installation position
  • Specify the installation side in the KIA Kx5 / Sportage ’21 quotation request
  • Compare the removed inner tail light assembly with the product image before ordering
  • Obtain current packing details before shipment planning
  • Commercial request: identify volume and delivery location
  • Workshop images should cover fixing-point close-up and vehicle-side photograph

92403-Q5100 / 92404-Q5100 Tail Light Inner for KIA Soluto / Seltos/Kx3

  • Use KIA Soluto / Seltos/Kx3 production details to review 92403-Q5100
  • Use a vehicle-side image to confirm 92403-Q5100 and installed position
  • Do not finalize KIA Soluto / Seltos/Kx3 tail light inner fitment until mounting tabs and installed position agree
  • Record fastener spacing when checking the KIA Soluto / Seltos/Kx3 92403-Q5100 option
  • Ask the workshop to compare 92403-Q5100 without modifying brackets
  • Treat 92403-Q5100 as a cross-reference, not the only fitment test
  • KIA Soluto / Seltos/Kx3 Tail Light Inner reference numbers: 92403-Q5100 / 92404-Q5100
  • Component under review: Tail Light Inner
  • Review the KIA Soluto / Seltos/Kx3 opening before approving 92403-Q5100

92403-S1000 / 92404-S1000 Tail Light Assemblyp Inner for Hyundai Santa Fe ’19

  • Written references: 92403-S1000 / 92404-S1000
  • Retain the removed tail light assemblyp inner for workshop comparison
  • Compare clearance beside bumper and grille
  • Review lens profile and outer edge at the installation area
  • Quotation input: quantity plus destination
  • Packing entry: 62 × 31 × 54CM / 20PCS
  • Workshop route: a body-shop buyer should verify left or right installation position before the stock request is released

92403-S1100 / 92404-S1100 Inner Tail Light Assembly Led for Hyundai Santa Fe ’19

  • Cross-check lens profile and outer edge
  • Retain the removed inner tail light assembly led for workshop comparison
  • Inner Tail Light Assembly Led application: Hyundai Santa Fe ’19
  • Verify electrical plug and pin layout at the installation area
  • Written references: 92403-S1100 / 92404-S1100
  • Quotation input: quantity plus destination
  • Workshop route: a collision-repair specialist should cross-check clearance beside bumper and grille before the fitment decision is signed off

92403-S1500 / 92404-S1500 Inner Tail Light Assembly for Hyundai Santa Fe ’21

  • Cross-check mounting tabs around the housing at the installation area
  • Cross-check the vehicle record before purchasing
  • Retain the removed inner tail light assembly for workshop comparison
  • Inner Tail Light Assembly application: Hyundai Santa Fe ’21
  • Check electrical plug and pin layout
  • Assess left or right installation position against the removed part
  • Workshop route: the service adviser should trace lens profile and outer edge before the repair schedule is finalized

92405-0X100 / 92406-0X100 Rear Bumper Lamp for Hyundai I10 ’07 / I10 ’11

  • Cross-check electrical plug and pin layout
  • Quotation input: quantity plus destination
  • Retain the removed rear bumper lamp for workshop comparison
  • Examine lens profile and outer edge
  • Measure left or right installation position against the removed part
  • Trace mounting tabs around the housing at the installation area
  • Workshop route: the service adviser should trace lens profile and outer edge before the carton is allocated

PRODUCTS

HOME  /  PRODUCTS