Showing 2665–2676 of 5389 results

92201-A7500 / 92202-A7500 Fog Light for KIA K3 ’13 / K3 ’16

  • Check KIA K3 '13 / K3 '16 seal boundary for quotation preparation
  • Check 92201-A7500 orientation before side selection
  • Compare lens profile while reviewing the 92201-A7500 configuration
  • Record seal boundary when checking the KIA K3 '13 / K3 '16 92201-A7500 option
  • Use a vehicle-side image to confirm 92201-A7500 and left/right orientation
  • Confirm the KIA K3 '13 / K3 '16 fog light front, rear, left or right position where applicable
  • Confirm lens profile, then verify the 92201-A7500 outer edge
  • Match the pictured fog light construction to the original KIA K3 '13 / K3 '16 part
  • Packing reference for this fog light: 90*38*40CM/10PCS

92201-B4000 / 92202-B4000 Fog Light for Hyundai I10 ’11 / I10 ‘2014

  • Measure left or right installation position at the installation area
  • Trace clearance beside bumper and grille against the removed part
  • Photograph the vehicle record before purchasing
  • Packing entry: 92 × 36 × 38CM / 10PCS
  • Retain the removed fog light for workshop comparison
  • Written references: 92201-B4000 / 92202-B4000
  • Workshop route: the receiving technician should note electrical plug and pin layout before the commercial request is submitted

92201-B4010 / 92202-B4010 Fog Light for Hyundai I10 ’11 / I10 ‘2014

  • Quotation input: quantity plus destination
  • Packing entry: 76 × 28 × 68CM / 10PCS
  • Written references: 92201-B4010 / 92202-B4010
  • Confirm the vehicle record before purchasing
  • Trace lens profile and outer edge
  • Measure mounting tabs around the housing against the removed part
  • Workshop route: the importing distributor should document clearance beside bumper and grille before the delivery plan is confirmed

92201-B4510 / 92202-B4510 Fog Light for Hyundai I10 ‘2014 / I10 ‘2017

  • Confirm left or right installation position
  • Measure the vehicle record before purchasing
  • Packing entry: 91 × 49 × 41CM / 20PCS
  • Written references: 92201-B4510 / 92202-B4510
  • Fog Light application: Hyundai I10 ‘2014 / I10 ‘2017
  • Examine clearance beside bumper and grille
  • Workshop route: the repair planner should verify left or right installation position before the vehicle is dismantled

92201-B4600 / 92202-B4600 Fog Light for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d

  • Fog Light application: Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d
  • Measure electrical plug and pin layout
  • Evaluate left or right installation position at the installation area
  • Retain the removed fog light for workshop comparison
  • Photograph the vehicle record before purchasing
  • Note clearance beside bumper and grille against the removed part
  • Workshop route: a body-shop buyer should compare electrical plug and pin layout before the packing plan is prepared

92201-B4700 / 92202-B4700 Fgo Lamp for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d

  • Quotation input: quantity plus destination
  • Identify lens profile and outer edge
  • Fgo Lamp application: Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d
  • Document electrical plug and pin layout at the installation area
  • Written references: 92201-B4700 / 92202-B4700
  • Compare mounting tabs around the housing against the removed part
  • Workshop route: the stock controller should cross-check clearance beside bumper and grille before the fitment decision is signed off

92201-C1000 / 92202-C1000 Fog Light for Hyundai Sonata ’11-’13 / Sonata ’14

  • Packing entry: 78 × 40 × 36CM / 10PCS
  • Fog Light application: Hyundai Sonata ’11-’13 / Sonata ’14
  • Written references: 92201-C1000 / 92202-C1000
  • Note the vehicle record before purchasing
  • Trace mounting tabs around the housing
  • Measure left or right installation position
  • Workshop route: the repair planner should inspect mounting tabs around the housing before the quotation is approved

92201-C4000 / 92202-C4000 Fog Light for Hyundai New Atos Eon / Atos ’21

  • Fog Light application: Hyundai New Atos Eon / Atos ’21
  • Packing entry: 75 × 56 × 42CM/20PCS
  • Retain the removed fog light for workshop comparison
  • Check housing depth behind the lamp at the installation area
  • Examine lens profile and edge contour
  • Quotation input: quantity plus destination

92201-C5000 / 92202-C5000 Fog Light for KIA Sorento ’12 / Sorento ’15

  • KIA fog light listed for KIA Sorento ’12 / Sorento ’15
  • Searchable OE references: 92201-C5000 / 92202-C5000
  • Component identifiers: clearance beside bumper and grille, lens profile and outer edge and electrical plug and pin layout
  • Vehicle opening check: mounting tabs around the housing and left or right installation position
  • Specify the installation side in the KIA Sorento ’12 / Sorento ’15 quotation request
  • Review the complete product image beside the part taken from the vehicle
  • Check packaging against the intended order volume
  • Order planning data: required units and receiving country
  • Vehicle-side proof should show straight-on view and upper-edge image

92201-C7000 / 92202-C7000 Fog Light for Hyundai I20 ’12 / I20 ’16

  • Written references: 92201-C7000 / 92202-C7000
  • Retain the removed fog light for workshop comparison
  • Identify mounting tabs around the housing
  • Photograph clearance beside bumper and grille at the installation area
  • Trace left or right installation position
  • Cross-check the vehicle record before purchasing
  • Workshop route: the parts coordinator should trace mounting tabs around the housing before the installation begins

92201-C7500 / 92202-C7500 Fog Light for Hyundai I20 ’18 / I30 ’09

  • Packing specification: request with quotation
  • Document the vehicle record before purchasing
  • Quotation input: quantity plus destination
  • Written references: 92201-C7500 / 92202-C7500
  • Fog Light application: Hyundai I20 ’18 / I30 ’09
  • Photograph left or right installation position
  • Workshop route: the procurement contact should confirm left or right installation position before the fitment decision is signed off

92201-C7600 / 92202-C7600 Fog Light Led for Hyundai I20 ’18 / I30 ’09

  • Record lens profile and outer edge
  • Review left or right installation position against the removed part
  • Quotation input: quantity plus destination
  • Review the vehicle record before purchasing
  • Packing specification: request with quotation
  • Record electrical plug and pin layout
  • Workshop route: the importing distributor should measure lens profile and outer edge before the stock request is released

PRODUCTS

HOME  /  PRODUCTS