Showing 1393–1404 of 5298 results

86551-A4000 / 86552-A4000 Front Bumper Holder for KIA Carens ’13 / Eurostar’04 / Picanto

  • KIA application shown on this page: KIA Carens ’13 / Eurostar’04 / Picanto
  • Identification numbers: 86551-A4000 / 86552-A4000
  • Part recognition points: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
  • Vehicle-side check: upper edge alignment below the lamps and overall corner curvature
  • Check mounting direction without relying on a mirrored image
  • Match the complete outline and attachment face before approving fitment
  • Request carton size and quantity per carton
  • Distributor request: add quantity and receiving market
  • Use lower-retainer view together with connector close-up for configuration review

86551-AA000 / 86552-AA000 Front Bumper Bracket for Hyundai Elantra ’21

  • Identify upper edge alignment below the lamps against the removed part
  • Measure lamp or grille openings
  • Confirm the vehicle record before purchasing
  • Written references: 86551-AA000 / 86552-AA000
  • Packing specification: request with quotation
  • Front Bumper Bracket application: Hyundai Elantra ’21
  • Workshop route: the importing distributor should compare bracket and bolt-hole spacing before the packing plan is prepared

86551-CC000 / 86552-CC000 / 86553-CC000 / 86554-CC000 Front Bumper Bracket for KIA Sonet 2022 / Carnival ’02-’04

  • Front Bumper Bracket supply entry for the KIA model label KIA Sonet 2022 / Carnival ’02-’04
  • OE reference shown: 86551-CC000 / 86552-CC000 / 86553-CC000 / 86554-CC000
  • Fitment identifiers: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
  • Attachment review: upper edge alignment below the lamps and overall corner curvature
  • Confirm component location before stock is allocated
  • Compare physical geometry rather than selecting from the model name alone
  • Ask for current carton data with availability
  • Wholesale quotation requires quantity plus destination
  • A clear vehicle-side photograph should accompany the rear mounting view

86551-D3000 / 86552-D3000 Headlight Assembly Bracket side for Hyundai Tucson ’16

  • Retain the removed headlight assembly bracket side for workshop comparison
  • Written references: 86551-D3000 / 86552-D3000
  • Packing specification: request with quotation
  • Headlight Assembly Bracket side application: Hyundai Tucson ’16
  • Evaluate electrical plug and pin layout at the installation area
  • Cross-check lens profile and outer edge
  • Workshop route: the procurement contact should verify clearance beside bumper and grille before the stock request is released

86551-D4500 / 86552-D4500 Front Bumper Bracket for KIA K5 ’19

  • Validate the front bumper bracket outline associated with 86551-D4500
  • Provide installed, reverse-side and front bumper bracket fixing-point photographs
  • Ask the workshop to compare 86551-D4500 without modifying brackets
  • Check whether 86551-D4500 matches the photographed KIA K5 '19 construction
  • Do not finalize KIA K5 '19 front bumper bracket fitment until bracket profile and panel clearance agree
  • KIA application: K5 '19
  • Confirm 86551-D4500 clearances beside surrounding components
  • Supply clear fixing-point evidence for the 86551-D4500 enquiry
  • Use panel clearance to distinguish the KIA K5 '19 front bumper bracket version

86551-F1000 / 86552-F1000 Headlight Assembly Bracket for KIA Kx5 / Sportage ’21

  • Headlight Assembly Bracket matched to the KIA designation KIA Kx5 / Sportage ’21
  • OE cross-reference: 86551-F1000 / 86552-F1000
  • Selection criteria: left or right installation position, clearance beside bumper and grille and lens profile and outer edge
  • Installation-area review: electrical plug and pin layout and mounting tabs around the housing
  • Check front/rear and left/right location where applicable
  • Compare physical geometry rather than selecting from the model name alone
  • Obtain current packing details before shipment planning
  • Wholesale quotation requires quantity plus destination
  • Document the component with side-profile photograph and straight-on view

86551-K0000 / 86552-K0000 Front Bumper Bracket for KIA Soul’15 / Soul’20

  • State quantity and destination for the KIA Soul'15 / Soul'20 B2B enquiry
  • Confirm mounting tabs, then verify the 86551-K0000 outer edge
  • Treat 86551-K0000 as a cross-reference, not the only fitment test
  • Confirm 86551-K0000 clearances beside surrounding components
  • Use a vehicle-side image to confirm 86551-K0000 and installed position
  • Request current front bumper bracket carton dimensions and pieces per carton
  • Do not finalize KIA Soul'15 / Soul'20 front bumper bracket fitment until mounting tabs and installed position agree
  • Use 86551-K0000 only after connector and mounts agree
  • Use installed position to distinguish the KIA Soul'15 / Soul'20 front bumper bracket version

86551-K6000 / 86552-K6000 / 86553-K6000 / 86554-K6000 Front Bumper Bracket for Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d

  • Verify upper edge alignment below the lamps
  • Front Bumper Bracket application: Hyundai Grand I10 ’21 / Nios 5d / Grand I10 ’21 4d
  • Compare side-retainer engagement
  • Confirm overall corner curvature at the installation area
  • Written references: 86551-K6000 / 86552-K6000 / 86553-K6000 / 86554-K6000
  • Packing specification: request with quotation
  • Workshop route: a body-shop buyer should photograph side-retainer engagement before the shipment is booked

86551-L1000 / 86552-L1000 Front Bumper Bracket for Hyundai Sonata ’21

  • Packing specification: request with quotation
  • Quotation input: quantity plus destination
  • Front Bumper Bracket application: Hyundai Sonata ’21
  • Written references: 86551-L1000 / 86552-L1000
  • Inspect upper edge alignment below the lamps against the removed part
  • Retain the removed front bumper bracket for workshop comparison
  • Workshop route: the procurement contact should compare bracket and bolt-hole spacing before the carton is allocated

86551-L2000 / 86552-L2000 Front Bumper Bracket for KIA K5 ’21

  • Photograph 86551-L2000 from front and reverse directions
  • Resolve any panel clearance difference affecting the 86551-L2000 version
  • Do not finalize KIA K5 '21 front bumper bracket fitment until bracket profile and panel clearance agree
  • Do a loose trial placement before releasing the 86551-L2000 order
  • Include 86551-L2000 in the technical approval request
  • Validate the front bumper bracket outline associated with 86551-L2000
  • Record locating holes when checking the KIA K5 '21 86551-L2000 option
  • Request current front bumper bracket carton dimensions and pieces per carton
  • Compare bracket profile while reviewing the 86551-L2000 configuration

86551-M6000 / 86552-M6000 Front Bumper Bracket for KIA K3’19

  • Check whether 86551-M6000 matches the photographed KIA K3'19 construction
  • Treat 86551-M6000 as a cross-reference, not the only fitment test
  • Record locating holes when checking the KIA K3'19 86551-M6000 option
  • Resolve any panel clearance difference affecting the 86551-M6000 version
  • KIA K3'19 Front Bumper Bracket reference numbers: 86551-M6000 / 86552-M6000
  • Compare the original KIA K3'19 part with 86551-M6000
  • KIA application: K3'19
  • Review the KIA K3'19 opening before approving 86551-M6000
  • Confirm the KIA K3'19 front bumper bracket front, rear, left or right position where applicable

86551-N9000 / 86552-N9000 / 86553-N9000 / 86554-N9000 Front Bumper Brakcet for Hyundai Tucson ’21

  • Packing specification: request with quotation
  • Quotation input: quantity plus destination
  • Front Bumper Brakcet application: Hyundai Tucson ’21
  • Written references: 86551-N9000 / 86552-N9000 / 86553-N9000 / 86554-N9000
  • Trace side-retainer engagement
  • Trace lamp or grille openings
  • Workshop route: the procurement contact should assess lamp or grille openings before the repair schedule is finalized

PRODUCTS

HOME  /  PRODUCTS