86531-S1010 Front Bumper Grille for Hyundai Santa Fe ’19
- Examine overall corner curvature at the installation area
- Retain the removed front bumper grille for workshop comparison
- Capture upper edge alignment below the lamps
- Identify side-retainer engagement
- Quotation input: quantity plus destination
- Packing entry: 108 × 22 × 16CM / 10PCS
- Workshop route: a collision-repair specialist should photograph side-retainer engagement before the stock request is released
86531-S1500 Front Bumper Grille for Hyundai Santa Fe ’21
- Quotation input: quantity plus destination
- Trace bracket and bolt-hole spacing at the installation area
- Inspect lamp or grille openings against the removed part
- Confirm the vehicle record before purchasing
- Retain the removed front bumper grille for workshop comparison
- Packing specification: request with quotation
- Workshop route: a body-shop buyer should record upper edge alignment below the lamps before the commercial request is submitted
86532-G6AA0 Front Bumper Grille Cover for KIA Picanto ’21
- Front Bumper Grille Cover catalogue application: KIA Picanto ’21
- Replacement reference: 86532-G6AA0
- Physical comparison: lamp or grille openings, side-retainer engagement and upper edge alignment below the lamps
- Position check: overall corner curvature and bracket and bolt-hole spacing
- Confirm component location before stock is allocated
- Retain the original item until the replacement version is accepted
- Request pieces per carton with the B2B offer
- Stock enquiry: include requested quantity and destination
- Identification photos should contain installation-opening picture and original-label photograph
86532-L2300 Front Bumper Lower for KIA K5 ’21 Sport / K3 ’13
- Provide installed, reverse-side and front bumper lower fixing-point photographs
- Do a loose trial placement before releasing the 86532-L2300 order
- Treat 86532-L2300 as a cross-reference, not the only fitment test
- Match the pictured front bumper lower construction to the original KIA K5 '21 Sport / K3 '13 part
- State quantity and destination for the KIA K5 '21 Sport / K3 '13 B2B enquiry
- Record reverse-side ribs when checking the KIA K5 '21 Sport / K3 '13 86532-L2300 option
- Check 86532-L2300 orientation before side selection
- Validate the front bumper lower outline associated with 86532-L2300
- Confirm the KIA K5 '21 Sport / K3 '13 front bumper lower front, rear, left or right position where applicable
86532-M6000 Front Bumper Lower for KIA K3’19 / K3’19 GT 5D / K3 ’21
- Provide installed, reverse-side and front bumper lower fixing-point photographs
- Record corner geometry when checking the KIA K3'19 / K3'19 GT 5D / K3 '21 86532-M6000 option
- Include 86532-M6000 in the technical approval request
- Do not finalize KIA K3'19 / K3'19 GT 5D / K3 '21 front bumper lower fitment until overall dimensions and service access agree
- Check 86532-M6000 orientation before side selection
- Component under review: Front Bumper Lower
- Supply clear fixing-point evidence for the 86532-M6000 enquiry
- Use 86532-M6000 only after connector and mounts agree
- Inspect the front bumper lower overall dimensions before workshop approval
86539-CP000 Front Bumper Bracket for KIA Bongo ’04 / Bongo ’12-’16 / Bongo’19
- KIA front bumper bracket listed for KIA Bongo ’04 / Bongo ’12-’16 / Bongo’19
- Searchable OE reference: 86539-CP000
- Fitment identifiers: bracket and bolt-hole spacing, lamp or grille openings and side-retainer engagement
- Position verification: upper edge alignment below the lamps and overall corner curvature
- Use a vehicle-side photo to establish the required direction
- Compare the removed front bumper bracket with the product image before ordering
- Export packing is available with the supply offer
- Supply terms can be reviewed after quantity and market are stated
- Provide one full component outline and one chassis-plate image
86539-L1000 Front Bumper Board for Hyundai Sonata ’21
- Review the vehicle record before purchasing
- Review bracket and bolt-hole spacing
- Photograph upper edge alignment below the lamps against the removed part
- Evaluate lamp or grille openings
- Written reference: 86539-L1000
- Quotation input: quantity plus destination
- Workshop route: the service adviser should compare bracket and bolt-hole spacing before the vehicle is dismantled
86540-2WAC0 Front Bumper Upper for Hyundai Santa Fe ’13 / Santa Fe’16
- Front Bumper Upper application: Hyundai Santa Fe ’13 / Santa Fe’16
- Quotation input: quantity plus destination
- Retain the removed front bumper upper for workshop comparison
- Inspect side-retainer engagement against the removed part
- Check the vehicle record before purchasing
- Trace lamp or grille openings at the installation area
- Workshop route: the parts coordinator should capture overall corner curvature before the delivery plan is confirmed
86540-2WAC0 Front Buper for Hyundai Santa Fe ’13 / Santa Fe’16
- Packing specification: request with quotation
- Quotation input: quantity plus destination
- Trace installation orientation against the removed part
- Retain the removed front buper for workshop comparison
- Compare the vehicle record before purchasing
- Front Buper application: Hyundai Santa Fe ’13 / Santa Fe’16
- Workshop route: the parts coordinator should align overall dimensions before the commercial request is submitted
86541-F2000 / 86542-F2000 Air Outlet Bracket for Hyundai Elantra ’16
- Match clearance from nearby panels
- Review overall span at the installation area
- Written references: 86541-F2000 / 86542-F2000
- Examine left and right mounting ends against the removed part
- Quotation input: quantity plus destination
- Retain the removed air outlet bracket for workshop comparison
- Workshop route: the importing distributor should document bracket orientation before the vehicle is dismantled
86541-L2300 / 86542-L2300 Fog Light Cover for KIA K5 ’21 Sport / K3 ’13
- Keep 86541-L2300 with the vehicle identification photograph
- Resolve any panel clearance difference affecting the 86541-L2300 version
- Use panel clearance to distinguish the KIA K5 '21 Sport / K3 '13 fog light cover version
- Use a vehicle-side image to confirm 86541-L2300 and panel clearance
- Provide installed, reverse-side and fog light cover fixing-point photographs
- Include 86541-L2300 in the technical approval request
- Match 86541-L2300 to the removed sample at every fixing point
- Treat 86541-L2300 as a cross-reference, not the only fitment test
- Confirm bracket profile, then verify the 86541-L2300 outer edge
86541-M6000 / 86542-M6000 Air Duct for KIA K3’19
- Confirm the KIA K3'19 air duct front, rear, left or right position where applicable
- Check 86541-M6000 orientation before side selection
- Request current air duct carton dimensions and pieces per carton
- Component under review: Air Duct
- Match the pictured air duct construction to the original KIA K3'19 part
- Record reverse-side ribs when checking the KIA K3'19 86541-M6000 option
- Inspect the air duct retaining clips against the removed component
- Keep 86541-M6000 with the vehicle identification photograph
- Treat 86541-M6000 as a cross-reference, not the only fitment test
PRODUCTS
HOME / PRODUCTS
Choose By Brand
68 automotive brands · Select a brand to view products
HYUNDAI
KIA
DAEWOO
SSANGYONG
TOYOTA
HONDA
NISSAN
MAZDA
MITSUBISHI
SUBARU
SUZUKI
LEXUS
INFINITI
ACURA
ISUZU
SCION
VOLKSWAGEN
BMW
MERCEDES-BENZ
AUDI
PORSCHE
OPEL
SMART
JETTA
FORD
CHEVROLET
BUICK
CADILLAC
CHRYSLER
DODGE
GMC
JEEP
LINCOLN
RAM
TESLA
PEUGEOT
CITROEN
RENAULT
BYD
GEELY
CHERY
CHANGAN
GWM
HAVAL
JAC
DONGFENG AEOUS
TRUMPCHI
AION
DENZA
LIXIANG
ZEEKR
ORA
BESTUNE
LYNK&CO
VOLVO
JAGUAR
LAND ROVER
MINI
MORRIS GARAGES
ALFA ROMEO
FIAT
LANCIA
CUPRA
SEAT
SKODA
DACIA
IVECO
HOLDENNo matching brand found.