Tail Light Assembly(Crystal) – Amber Side Marker for Daewoo Hrv / Lacetti / Lemans ’96 / Tico

Tail Light Assembly(Crystal) – Amber Side Marker for Daewoo Hrv / Lacetti / Lemans ’96 / Tico: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.

Product Specifications

Workshop Comparison

This tail light assembly(crystal) – amber side marker is associated with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. This page does not assign a replacement number where none is supplied; visual checks remain necessary. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille

A collision-repair specialist should capture lens profile and outer edge, compare electrical plug and pin layout, and note clearance beside bumper and grille before the repair schedule is finalized. This route applies to the tail light assembly(crystal) – amber side marker shown for Daewoo Hrv / Lacetti / Lemans ’96 / Tico.

If images accompany the enquiry, include a removed-part overview, a lower-retainer view, and a full component outline. Label the evidence with the vehicle designation Daewoo Hrv / Lacetti / Lemans ’96 / Tico so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with removed-part overview to capture lens profile and outer edge. A second image should show mounting tabs around the housing from lower-retainer view. Before the repair schedule is finalized, compare clearance beside bumper and grille and note any difference from the removed component. Keep these observations with the Daewoo Hrv / Lacetti / Lemans ’96 / Tico vehicle record.

The maintenance supervisor should mark clearance beside bumper and grille from a straight-on view, then capture clearance beside bumper and grille before the stock request is released. The installation team should photograph lens profile and outer edge from a fastener detail, then align lens profile and outer edge before the carton is allocated. The procurement contact should cross-check mounting tabs around the housing from an upper-edge image, then inspect mounting tabs around the housing before the quotation is approved. The installation team should inspect lens profile and outer edge from a connector close-up, then confirm left or right installation position before the installation begins.

Component Matching Record

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 69 × 41 × 54CM / 20PCS; reconfirm current packing when freight is quoted.

Reference Check

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

How should the model application be interpreted?

The associated model designation is Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Confirm the body or electrical configuration relevant to this tail light assembly(crystal) – amber side marker.

How should fitment be checked before ordering?

Check lens profile and outer edge, confirm mounting tabs around the housing, and retain the removed part until the replacement has been compared side by side.

What information helps confirm availability?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. This information helps separate technical confirmation from the later shipping calculation.