Rear Fog Light for Daewoo Hrv / Lacetti / Lemans ’96 / Tico

Rear Fog Light for Daewoo Hrv / Lacetti / Lemans ’96 / Tico: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Part Recognition Guide

This rear fog light is associated with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Because no OEM reference is available, provide VIN or chassis details and an image of the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

A vehicle inspector should cross-check mounting tabs around the housing, document left or right installation position, and record electrical plug and pin layout before the packing plan is prepared. This route applies to the rear fog light shown for Daewoo Hrv / Lacetti / Lemans ’96 / Tico.

If images accompany the enquiry, include an original-label photograph, a fastener detail, and a connector close-up. Label the evidence with the vehicle designation Daewoo Hrv / Lacetti / Lemans ’96 / Tico so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with original-label photograph to cross-check mounting tabs around the housing. A second image should show clearance beside bumper and grille from fastener detail. Before the packing plan is prepared, document electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Hrv / Lacetti / Lemans ’96 / Tico vehicle record.

The receiving technician should trace mounting tabs around the housing from a fixing-point close-up, then record left or right installation position before the repair schedule is finalized. The stock controller should trace left or right installation position from a corner-profile view, then confirm electrical plug and pin layout before the carton is allocated. The importing distributor should cross-check left or right installation position from a connector close-up, then inspect left or right installation position before the replacement is test-positioned. The procurement contact should review clearance beside bumper and grille from a full component outline, then document mounting tabs around the housing before the quotation is approved.

Buyer Verification Notes

Confirm left and right orientation at the vehicle rather than relying on a mirrored product photograph. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What is the listed vehicle application?

The listing covers Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Because configurations may vary, check the actual installation area before approving the rear fog light.

What should be compared with the removed component?

Fitment evidence should show mounting tabs around the housing, clearance beside bumper and grille and the position where the component will be installed.

How can a trade buyer request pricing?

Send the order volume and destination together with VIN or chassis information where available. This information helps separate technical confirmation from the later shipping calculation.