Rear Bumper Version A for Daewoo N300 / N400 / Cerato ’05

Rear Bumper Version A for Daewoo N300 / N400 / Cerato ’05: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Fitment Evidence

This rear bumper version a is associated with Daewoo N300 / N400 / Cerato ’05. The OEM field remains blank; do not substitute a stock code or sequence number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The stock controller should document side-retainer engagement, record upper edge alignment below the lamps, and align lamp or grille openings before the installation begins. This route applies to the rear bumper version a shown for Daewoo N300 / N400 / Cerato ’05.

If images accompany the enquiry, include a vehicle-side photograph, a corner-profile view, and a side-profile photograph. Label the evidence with the vehicle designation Daewoo N300 / N400 / Cerato ’05 so the workshop and purchasing team review one configuration.

The stock controller can begin with vehicle-side photograph to document side-retainer engagement. A second image should show overall corner curvature from corner-profile view. Before the installation begins, record lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo N300 / N400 / Cerato ’05 vehicle record.

The receiving technician should inspect upper edge alignment below the lamps from a fastener detail, then document overall corner curvature before the packing plan is prepared. A vehicle inspector should capture overall corner curvature from a removed-part overview, then confirm side-retainer engagement before the replacement is test-positioned. The repair planner should measure side-retainer engagement from a straight-on view, then compare lamp or grille openings before the repair schedule is finalized. The service adviser should compare lamp or grille openings from a rear mounting view, then trace upper edge alignment below the lamps before the repair schedule is finalized.

Installation Planning

Place old and replacement components side by side, then review every fixing point before installation. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which Daewoo model does this page cover?

The listing covers Daewoo N300 / N400 / Cerato ’05. Because configurations may vary, check the actual installation area before approving the rear bumper version a.

How is the pictured version best verified?

Fitment evidence should show side-retainer engagement, overall corner curvature and the position where the component will be installed.

What should be included in a B2B enquiry?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. The supplier can then review the product version, carton requirements and delivery options.