Grille for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

Grille for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the grille inspection group.

Product Specifications

Part Recognition Guide

This grille is associated with Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. This page does not assign a replacement number where none is supplied; visual checks remain necessary. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Clearance beside the lamps
• Outer perimeter shape
• Upper tab positions
• Lower clip arrangement
• Mesh or slat pattern

A vehicle inspector should assess clearance beside the lamps, measure outer perimeter shape, and verify mesh or slat pattern before the replacement is test-positioned. This route applies to the grille shown for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti.

If images accompany the enquiry, include an underside image, an adjacent-panel image, and an upper-edge image. Label the evidence with the vehicle designation Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with underside image to assess clearance beside the lamps. A second image should show upper tab positions from adjacent-panel image. Before the replacement is test-positioned, measure mesh or slat pattern and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti vehicle record.

A collision-repair specialist should record mesh or slat pattern from a straight-on view, then confirm outer perimeter shape before the vehicle is dismantled. The service adviser should confirm upper tab positions from an installation-opening picture, then review mesh or slat pattern before the vehicle is dismantled. The importing distributor should evaluate outer perimeter shape from an original-label photograph, then evaluate mesh or slat pattern before the fitment decision is signed off. The stock controller should note upper tab positions from a fixing-point close-up, then document outer perimeter shape before the delivery plan is confirmed.

Reference Check

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Ordering Information

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

How should the model application be interpreted?

The stated vehicle is Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How should fitment be checked before ordering?

Check clearance beside the lamps, confirm upper tab positions, and retain the removed part until the replacement has been compared side by side.

How can a trade buyer request pricing?

A complete sourcing request names the quantity, delivery market and the comparison information used. State the required side or installation position where that detail applies.