Fender Liner for Daewoo Sail ’00 / Corsa / Agile ’09-’13

Fender Liner for Daewoo Sail ’00 / Corsa / Agile ’09-’13: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the body inspection group.

Product Specifications

Workshop Comparison

This fender liner is associated with Daewoo Sail ’00 / Corsa / Agile ’09-’13. Use a side-by-side shape comparison in place of an invented reference number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Opening and hole pattern
• Left or right orientation
• Panel contour
• Bolt and clip locations
• Wheel-arch or lamp clearance

The procurement contact should align opening and hole pattern, verify left or right orientation, and evaluate wheel-arch or lamp clearance before the delivery plan is confirmed. This route applies to the fender liner shown for Daewoo Sail ’00 / Corsa / Agile ’09-’13.

If images accompany the enquiry, include a vehicle-side photograph, an underside image, and an installation-opening picture. Label the evidence with the vehicle designation Daewoo Sail ’00 / Corsa / Agile ’09-’13 so the workshop and purchasing team review one configuration.

The procurement contact can begin with vehicle-side photograph to align opening and hole pattern. A second image should show panel contour from underside image. Before the delivery plan is confirmed, verify wheel-arch or lamp clearance and note any difference from the removed component. Keep these observations with the Daewoo Sail ’00 / Corsa / Agile ’09-’13 vehicle record.

A collision-repair specialist should evaluate wheel-arch or lamp clearance from a full component outline, then document opening and hole pattern before the carton is allocated. The stock controller should compare bolt and clip locations from a straight-on view, then cross-check opening and hole pattern before the stock request is released. The maintenance supervisor should confirm opening and hole pattern from an adjacent-panel image, then document opening and hole pattern before the stock request is released. A vehicle inspector should align bolt and clip locations from a full component outline, then document panel contour before the packing plan is prepared.

Installation Planning

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. Recorded packing is 130 × 25 × 31CM / 10PCS; reconfirm current packing when freight is quoted.

Inspection Route

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What vehicle information should be checked first?

The recorded application is Daewoo Sail ’00 / Corsa / Agile ’09-’13. Confirm trim, market specification and the removed fender liner before purchase.

How is the pictured version best verified?

Ask the workshop to inspect opening and hole pattern together with panel contour. VIN or chassis information can clarify market-specific differences.

How can a trade buyer request pricing?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Keep each requested product on a separate line when several parts share one shipment.