92101090 Old Style Rear Bumper Version B for Daewoo Sail ’00 / Corsa / Agile ’09-’13

Rear Bumper(Old Style) for Daewoo Sail ’00 / Corsa / Agile ’09-’13: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Pre-Order Inspection

This old style rear bumper version b is associated with Daewoo Sail ’00 / Corsa / Agile ’09-’13. The OEM entry 92101090 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Fitment Evidence

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

A vehicle inspector should verify side-retainer engagement, cross-check upper edge alignment below the lamps, and align lamp or grille openings before the stock request is released. This route applies to the old style rear bumper version b shown for Daewoo Sail ’00 / Corsa / Agile ’09-’13.

If images accompany the enquiry, include a removed-part overview, a full component outline, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with removed-part overview to verify side-retainer engagement. A second image should show overall corner curvature from full component outline. Before the stock request is released, cross-check lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Sail ’00 / Corsa / Agile ’09-’13 vehicle record.

The receiving technician should measure side-retainer engagement from a connector close-up, then align lamp or grille openings before the shipment is booked. The repair planner should align upper edge alignment below the lamps from a rear mounting view, then capture overall corner curvature before the packing plan is prepared. The stock controller should note upper edge alignment below the lamps from a corner-profile view, then capture overall corner curvature before the quotation is approved. The parts coordinator should confirm side-retainer engagement from a connector close-up, then verify bracket and bolt-hole spacing before the purchase order is issued.

Supply Enquiry Details

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

Which vehicle is this component listed for?

The recorded application is Daewoo Sail ’00 / Corsa / Agile ’09-’13. Confirm trim, market specification and the removed old style rear bumper version b before purchase.

What evidence is useful for a fitment review?

Review side-retainer engagement first, then inspect overall corner curvature on the vehicle. Clear photographs help the supplier assess the required version.

What should be included in a B2B enquiry?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. State the required side or installation position where that detail applies.