Alternate Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

Alternate Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Commercial Request Details

This alternate front bumper is associated with Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. No OEM number is stated, so identification should rely on the vehicle record, photograph and mounting layout. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The stock controller should mark bracket and bolt-hole spacing, capture lamp or grille openings, and document overall corner curvature before the packing plan is prepared. This route applies to the alternate front bumper shown for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti.

If images accompany the enquiry, include a chassis-plate image, a connector close-up, and a corner-profile view. Label the evidence with the vehicle designation Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti so the workshop and purchasing team review one configuration.

The stock controller can begin with chassis-plate image to mark bracket and bolt-hole spacing. A second image should show side-retainer engagement from connector close-up. Before the packing plan is prepared, capture overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti vehicle record.

The installation team should measure upper edge alignment below the lamps from an installation-opening picture, then document upper edge alignment below the lamps before the quotation is approved. The maintenance supervisor should align overall corner curvature from a side-profile photograph, then assess overall corner curvature before the commercial request is submitted. The maintenance supervisor should mark side-retainer engagement from a fastener detail, then inspect overall corner curvature before the packing plan is prepared. The repair planner should assess lamp or grille openings from an installation-opening picture, then trace lamp or grille openings before the replacement is test-positioned.

Inspection Route

Place old and replacement components side by side, then review every fixing point before installation. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What is the listed vehicle application?

The associated model designation is Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Confirm the body or electrical configuration relevant to this alternate front bumper.

What evidence is useful for a fitment review?

The practical checks are bracket and bolt-hole spacing, side-retainer engagement and the surrounding clearance. Avoid choosing the item from the model name alone.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Add vehicle details so availability and packing can be checked against the requested version.