98610-2S000 Washer Fluid Reservoir for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16

Washer Fluid Reservoir for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16: The following information supports a structured pre-order check for trade buyers. The component belongs to the service inspection group.

Product Specifications

Part Recognition Guide

This washer fluid reservoir is associated with Hyundai Ix35 ’10-’12 / Ix35 ’13-’16. Retain the complete sequence 98610-2S000 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle Confirmation

• Hose connection size
• Mounting ears
• Engine-bay clearance
• Inlet and outlet locations
• Cap or cover position

The parts coordinator should trace hose connection size, cross-check mounting ears, and capture cap or cover position before the installation begins. This route applies to the washer fluid reservoir shown for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16.

If images accompany the enquiry, include a fixing-point close-up, a vehicle-side photograph, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with fixing-point close-up to trace hose connection size. A second image should show engine-bay clearance from vehicle-side photograph. Before the installation begins, cross-check cap or cover position and note any difference from the removed component. Keep these observations with the Hyundai Ix35 ’10-’12 / Ix35 ’13-’16 vehicle record.

The importing distributor should measure inlet and outlet locations from an upper-edge image, then measure mounting ears before the repair schedule is finalized. The receiving technician should verify engine-bay clearance from a side-profile photograph, then evaluate engine-bay clearance before the repair schedule is finalized. The installation team should compare inlet and outlet locations from an upper-edge image, then note mounting ears before the purchase order is issued. A vehicle inspector should mark cap or cover position from a chassis-plate image, then mark hose connection size before the commercial request is submitted.

Application Review

Confirm left and right orientation at the vehicle rather than relying on a mirrored product photograph. Recorded packing is 93 × 50 × 70CM / 20PCS; reconfirm current packing when freight is quoted.

Commercial Request Details

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

This washer fluid reservoir is listed for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16. Use that designation as a starting point and verify the vehicle configuration before ordering.

How should fitment be checked before ordering?

Ask the workshop to inspect hose connection size together with engine-bay clearance. VIN or chassis information can clarify market-specific differences.

How can a trade buyer request pricing?

A complete sourcing request names the quantity, delivery market and the comparison information used. Packing and freight can be discussed after the component version has been identified.