86513-2S000 / 86514-2S000 Front Bumper Bracket for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16

Front Bumper Bracket for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Vehicle-Side Evidence

This front bumper bracket is associated with Hyundai Ix35 ’10-’12 / Ix35 ’13-’16. Compare 86513-2S000 / 86514-2S000 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The receiving technician should mark upper edge alignment below the lamps, align overall corner curvature, and note side-retainer engagement before the replacement is test-positioned. This route applies to the front bumper bracket shown for Hyundai Ix35 ’10-’12 / Ix35 ’13-’16.

If images accompany the enquiry, include a connector close-up, an adjacent-panel image, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with connector close-up to mark upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from adjacent-panel image. Before the replacement is test-positioned, align side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Ix35 ’10-’12 / Ix35 ’13-’16 vehicle record.

The installation team should note bracket and bolt-hole spacing from a straight-on view, then capture lamp or grille openings before the commercial request is submitted. The importing distributor should verify bracket and bolt-hole spacing from a removed-part overview, then record side-retainer engagement before the commercial request is submitted. The stock controller should align overall corner curvature from an underside image, then note overall corner curvature before the packing plan is prepared. The stock controller should verify lamp or grille openings from an underside image, then review bracket and bolt-hole spacing before the packing plan is prepared.

Purchase Preparation

Keep protective wrapping in place where possible until the item has passed the initial comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Pre-Order Inspection

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What model is associated with this replacement part?

The stated vehicle is Hyundai Ix35 ’10-’12 / Ix35 ’13-’16. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What should be compared with the removed component?

Review upper edge alignment below the lamps first, then inspect bracket and bolt-hole spacing on the vehicle. Clear photographs help the supplier assess the required version.

What information is needed for a quotation?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Add vehicle details so availability and packing can be checked against the requested version.