96648503 Front Bumper for Daewoo Aveo ’05 / Aveo ’14

Front Bumper for Daewoo Aveo ’05 / Aveo ’14: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This front bumper is associated with Daewoo Aveo ’05 / Aveo ’14. Use 96648503 as the written lookup reference while also checking geometry and installation position. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The receiving technician should verify upper edge alignment below the lamps, evaluate overall corner curvature, and assess side-retainer engagement before the replacement is test-positioned. This route applies to the front bumper shown for Daewoo Aveo ’05 / Aveo ’14.

If images accompany the enquiry, include a rear mounting view, an adjacent-panel image, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with rear mounting view to verify upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from adjacent-panel image. Before the replacement is test-positioned, evaluate side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’05 / Aveo ’14 vehicle record.

The maintenance supervisor should document lamp or grille openings from a connector close-up, then document side-retainer engagement before the replacement is test-positioned. The receiving technician should cross-check side-retainer engagement from a lower-retainer view, then measure overall corner curvature before the carton is allocated. The parts coordinator should compare lamp or grille openings from a connector close-up, then confirm side-retainer engagement before the fitment decision is signed off. The parts coordinator should capture bracket and bolt-hole spacing from a corner-profile view, then note overall corner curvature before the purchase order is issued.

Workshop Comparison

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. Recorded packing is 186 × 45 × 40CM / 3PCS; reconfirm current packing when freight is quoted.

Reference Check

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

How should the model application be interpreted?

Application information points to Daewoo Aveo ’05 / Aveo ’14. A workshop should still compare the removed item and mounting location before ordering.

What should be compared with the removed component?

Ask the workshop to inspect upper edge alignment below the lamps together with bracket and bolt-hole spacing. VIN or chassis information can clarify market-specific differences.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.