95961827 Front Bumper for Daewoo Matiz-Iv ’09

Front Bumper for Daewoo Matiz-Iv ’09: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the bumper inspection group.

Product Specifications

Vehicle Confirmation

This front bumper is associated with Daewoo Matiz-Iv ’09. Cross-check 95961827 against the removed item, paying attention to every prefix, suffix and character. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The receiving technician should inspect side-retainer engagement, review upper edge alignment below the lamps, and measure lamp or grille openings before the quotation is approved. This route applies to the front bumper shown for Daewoo Matiz-Iv ’09.

If images accompany the enquiry, include a corner-profile view, a chassis-plate image, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with corner-profile view to inspect side-retainer engagement. A second image should show overall corner curvature from chassis-plate image. Before the quotation is approved, review lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iv ’09 vehicle record.

The receiving technician should note side-retainer engagement from a removed-part overview, then mark bracket and bolt-hole spacing before the quotation is approved. The receiving technician should compare upper edge alignment below the lamps from a rear mounting view, then cross-check overall corner curvature before the quotation is approved. A workshop estimator should assess overall corner curvature from a side-profile photograph, then record overall corner curvature before the vehicle is dismantled. A body-shop buyer should capture bracket and bolt-hole spacing from an upper-edge image, then photograph bracket and bolt-hole spacing before the stock request is released.

Reference Check

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 175 × 56 × 20CM / 5PCS; reconfirm current packing when freight is quoted.

Purchase Preparation

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which vehicle is this component listed for?

This front bumper appears under Daewoo Matiz-Iv ’09. Review the exact vehicle version rather than relying on the model name by itself.

What should be compared with the removed component?

Use the old component to check side-retainer engagement and overall corner curvature. Also state the installation side or position in the enquiry.

What information helps confirm availability?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. This information helps separate technical confirmation from the later shipping calculation.