92101-4L600 / 92102-4L600 Headlight Assembly for Hyundai Accent / Accent ’14 / Solaris ’16

Headlight Assembly for Hyundai Accent / Accent ’14 / Solaris ’16: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the lighting inspection group.

Product Specifications

Vehicle-Side Evidence

This headlight assembly is associated with Hyundai Accent / Accent ’14 / Solaris ’16. Write 92101-4L600 / 92102-4L600 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Commercial Request Details

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

A collision-repair specialist should cross-check mounting tabs around the housing, trace left or right installation position, and assess electrical plug and pin layout before the packing plan is prepared. This route applies to the headlight assembly shown for Hyundai Accent / Accent ’14 / Solaris ’16.

If images accompany the enquiry, include a straight-on view, an upper-edge image, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with straight-on view to cross-check mounting tabs around the housing. A second image should show clearance beside bumper and grille from upper-edge image. Before the packing plan is prepared, trace electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai Accent / Accent ’14 / Solaris ’16 vehicle record.

The parts coordinator should assess left or right installation position from a corner-profile view, then inspect electrical plug and pin layout before the replacement is test-positioned. The maintenance supervisor should assess electrical plug and pin layout from a removed-part overview, then capture electrical plug and pin layout before the repair schedule is finalized. A vehicle inspector should review mounting tabs around the housing from a corner-profile view, then photograph clearance beside bumper and grille before the fitment decision is signed off. A collision-repair specialist should assess clearance beside bumper and grille from a corner-profile view, then confirm electrical plug and pin layout before the repair schedule is finalized.

Replacement Selection Guide

Retain the removed part until the replacement has been visually compared and test-positioned. No packing entry is published here; request current carton and quantity information with the quotation.

Supply Enquiry Details

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What model is associated with this replacement part?

This headlight assembly appears under Hyundai Accent / Accent ’14 / Solaris ’16. Review the exact vehicle version rather than relying on the model name by itself.

How can an incorrect order be avoided?

Fitment evidence should show mounting tabs around the housing, clearance beside bumper and grille and the position where the component will be installed.

What information helps confirm availability?

For a trade enquiry, include required units, delivery location and photographs of the original component. This information helps separate technical confirmation from the later shipping calculation.