86636-J9BA0 Bracket-Rear Beam Lwr for Hyundai Kona 2021

Bracket-Rear Beam Lwr for Hyundai Kona 2021: Review the identification points below before adding this component to a repair estimate. The component belongs to the structure inspection group.

Product Specifications

Reference Check

This bracket-rear beam lwr is associated with Hyundai Kona 2021. The OEM entry 86636-J9BA0 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Bracket orientation
• Clearance from nearby panels
• Overall span
• Left and right mounting ends
• Bolt-hole centres

A collision-repair specialist should capture bracket orientation, mark clearance from nearby panels, and review bolt-hole centres before the installation begins. This route applies to the bracket-rear beam lwr shown for Hyundai Kona 2021.

If images accompany the enquiry, include an adjacent-panel image, an upper-edge image, and a straight-on view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with adjacent-panel image to capture bracket orientation. A second image should show overall span from upper-edge image. Before the installation begins, mark bolt-hole centres and note any difference from the removed component. Keep these observations with the Hyundai Kona 2021 vehicle record.

A collision-repair specialist should compare left and right mounting ends from a full component outline, then evaluate overall span before the installation begins. A vehicle inspector should cross-check clearance from nearby panels from an upper-edge image, then align left and right mounting ends before the carton is allocated. The installation team should document overall span from a fastener detail, then photograph bolt-hole centres before the stock request is released. A workshop estimator should verify bolt-hole centres from a straight-on view, then capture clearance from nearby panels before the shipment is booked.

Inspection Route

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Part Recognition Guide

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What model is associated with this replacement part?

The associated model designation is Hyundai Kona 2021. Confirm the body or electrical configuration relevant to this bracket-rear beam lwr.

How can an incorrect order be avoided?

Compare bracket orientation, overall span and the required installation position with the removed component. VIN or chassis details add another useful check.

What information is needed for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. This information helps separate technical confirmation from the later shipping calculation.