86560-J9CA0 Bumper Grille for Hyundai Kona 2021

Bumper Grille for Hyundai Kona 2021: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Physical Fitment Points

This bumper grille is associated with Hyundai Kona 2021. Cross-check 86560-J9CA0 against the removed item, paying attention to every prefix, suffix and character. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Inspection Route

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The receiving technician should mark lamp or grille openings, assess side-retainer engagement, and trace bracket and bolt-hole spacing before the vehicle is dismantled. This route applies to the bumper grille shown for Hyundai Kona 2021.

If images accompany the enquiry, include a side-profile photograph, an underside image, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with side-profile photograph to mark lamp or grille openings. A second image should show upper edge alignment below the lamps from underside image. Before the vehicle is dismantled, assess bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Kona 2021 vehicle record.

The maintenance supervisor should inspect bracket and bolt-hole spacing from an underside image, then verify side-retainer engagement before the packing plan is prepared. The repair planner should assess upper edge alignment below the lamps from an adjacent-panel image, then verify bracket and bolt-hole spacing before the delivery plan is confirmed. A collision-repair specialist should evaluate upper edge alignment below the lamps from a removed-part overview, then mark lamp or grille openings before the repair schedule is finalized. The maintenance supervisor should document upper edge alignment below the lamps from a side-profile photograph, then verify bracket and bolt-hole spacing before the fitment decision is signed off.

Workshop Comparison

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Installation Planning

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which vehicle is this component listed for?

Application information points to Hyundai Kona 2021. A workshop should still compare the removed item and mounting location before ordering.

What evidence is useful for a fitment review?

Compare lamp or grille openings, upper edge alignment below the lamps and the required installation position with the removed component. VIN or chassis details add another useful check.

Which details help prepare shipping terms?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.