86630-D3000 Rear Bumper Support for Hyundai Tucson ’16 / Tucson ’18

Rear Bumper Support for Hyundai Tucson ’16 / Tucson ’18: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Repair Planning Notes

This rear bumper support is associated with Hyundai Tucson ’16 / Tucson ’18. The OEM entry 86630-D3000 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

A body-shop buyer should measure upper edge alignment below the lamps, verify overall corner curvature, and cross-check side-retainer engagement before the purchase order is issued. This route applies to the rear bumper support shown for Hyundai Tucson ’16 / Tucson ’18.

If images accompany the enquiry, include an upper-edge image, a removed-part overview, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with upper-edge image to measure upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from removed-part overview. Before the purchase order is issued, verify side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Tucson ’16 / Tucson ’18 vehicle record.

The procurement contact should cross-check upper edge alignment below the lamps from a removed-part overview, then align upper edge alignment below the lamps before the commercial request is submitted. The service adviser should inspect side-retainer engagement from an original-label photograph, then note upper edge alignment below the lamps before the commercial request is submitted. A body-shop buyer should mark lamp or grille openings from an adjacent-panel image, then review overall corner curvature before the quotation is approved. The parts coordinator should trace side-retainer engagement from a vehicle-side photograph, then evaluate side-retainer engagement before the carton is allocated.

Part Recognition Guide

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Technical Comparison Notes

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What model is associated with this replacement part?

This rear bumper support is listed for Hyundai Tucson ’16 / Tucson ’18. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

The practical checks are upper edge alignment below the lamps, bracket and bolt-hole spacing and the surrounding clearance. Avoid choosing the item from the model name alone.

What should be included in a B2B enquiry?

A complete sourcing request names the quantity, delivery market and the comparison information used. Keep each requested product on a separate line when several parts share one shipment.