86630-2B000 Rear Bumper Support for Hyundai Santa Fe’07-’08

Rear Bumper Support for Hyundai Santa Fe’07-’08: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Vehicle Confirmation

This rear bumper support is associated with Hyundai Santa Fe’07-’08. If 86630-2B000 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The importing distributor should align bracket and bolt-hole spacing, review lamp or grille openings, and document overall corner curvature before the delivery plan is confirmed. This route applies to the rear bumper support shown for Hyundai Santa Fe’07-’08.

If images accompany the enquiry, include a vehicle-side photograph, a corner-profile view, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with vehicle-side photograph to align bracket and bolt-hole spacing. A second image should show side-retainer engagement from corner-profile view. Before the delivery plan is confirmed, review overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe’07-’08 vehicle record.

The installation team should cross-check overall corner curvature from a side-profile photograph, then note overall corner curvature before the fitment decision is signed off. The repair planner should cross-check upper edge alignment below the lamps from a removed-part overview, then verify upper edge alignment below the lamps before the fitment decision is signed off. The stock controller should verify upper edge alignment below the lamps from a rear mounting view, then cross-check overall corner curvature before the stock request is released. The receiving technician should verify side-retainer engagement from a full component outline, then inspect bracket and bolt-hole spacing before the commercial request is submitted.

Identification Summary

Retain the removed part until the replacement has been visually compared and test-positioned. No packing entry is published here; request current carton and quantity information with the quotation.

Replacement Selection Guide

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What is the listed vehicle application?

This page associates the rear bumper support with Hyundai Santa Fe’07-’08. The vehicle record and original component should agree with the pictured version.

How can an incorrect order be avoided?

Check bracket and bolt-hole spacing, confirm side-retainer engagement, and retain the removed part until the replacement has been compared side by side.

How can a trade buyer request pricing?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. State the required side or installation position where that detail applies.